dpkg-buildpackage: source package is ispack-g77 dpkg-buildpackage: source version is 0.70-1 dpkg-buildpackage: source maintainer is Shin-ichi Takehiro dpkg-buildpackage: host architecture is i386 fakeroot debian/rules clean test -f debian/rules dh_clean rm -f build make veryclean make[1]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70' Cleaning bspack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/bspack/src' rm -f bsdmsg.o bsset0.o bscopy.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/bspack/src' Cleaning ftpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ftpack/src' rm -f ftdmsg.o ftr.o ftz.o ftct.o ftst.o ftcm.o ftsm.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ftpack/src' Cleaning tdpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/tdpack/src' rm -f tdrk4.o tdrk2.o tdbsm.o tdadm.o tdrkn.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/tdpack/src' Cleaning n2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/n2pack/src' rm -f n2init.o n2s2ga.o n2g2sa.o n2ajbs.o n2swnl.o n2swck.o n2swnn.o n2swbl.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/n2pack/src' Cleaning ndpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ndpack/src' rm -f ndc.o ndg.o ndv.o ndd.o ndt.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ndpack/src' Cleaning stpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/stpack/src' rm -f stinit.o stl.o stnm2l.o stogrd.o stc.o sts2ga.o sts2va.o stsrva.o stg2sa.o stv2sa.o stvrsa.o stajba.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/stpack/src' Cleaning smpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/smpack/src' rm -f smc.o smd.o smf.o smgaus.o sminit.o smnm2l.o smp.o smr.o sms.o smt.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/smpack/src' Cleaning snpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack/src' rm -f sngaus.o sninit.o snkini.o snt.o snnm2l.o snomp.o snt.f *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack/src' Cleaning sopack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack/src' rm -f soinit.o sot.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack/src' Cleaning sppack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack/src' rm -f spnjcb.o spnini.o spmini.o spclap.o spclam.o spswnl.o spswck.o spswnv.o spswcv.o spswli.o spswlv.o spswnw.o spswnx.o spswbl.o spswhv.o spswhi.o spswhw.o spswhx.o spswcx.o spswhw.f spswhx.f spswnw.f spswnx.f *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack/src' Cleaning appack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/appack/src' rm -f appack.o appack.f *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/appack/src' Cleaning flpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/flpack/src' rm -f flpack.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/flpack/src' Cleaning fepack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fepack/src' rm -f fepack.o fepack.f *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fepack/src' Cleaning fhpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fhpack/src' rm -f fhpack.o fhpack.f *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fhpack/src' Cleaning c2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/c2pack/src' rm -f c2init.o c2s2ga.o c2g2sa.o c2ajbs.o c2ajcb.o c2ajc2.o c2ajb2.o c2swnl.o c2swck.o c2swbl.o c2swnn.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/c2pack/src' Cleaning p2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p2pack/src' rm -f p2init.o p2s2ga.o p2g2sa.o p2ajbs.o p2swnl.o p2swnn.o p2swbl.o p2swck.o p2ajcb.o p2s2ga.f p2g2sa.f *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p2pack/src' Cleaning p3pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack/src' rm -f p3init.o p3s2ga.o p3g2sa.o p3elnl.o p3cnsv.o p3espt.o p3getu.o p3geto.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack/src' Cleaning p3pack-mpi/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack-mpi/src' rm -f p3smga.o p3gmsa.o p3gmtu.o p3gmto.o p3emnl.o p3cmsv.o p3empt.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack-mpi/src' Cleaning snpack-mpi/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack-mpi/src' rm -f snmini.o sntgms.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack-mpi/src' Cleaning sppack-mpi/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack-mpi/src' rm -f spmwnl.o spmwnv.o spmwnw.o spmwnx.o spmwhv.o spmwhw.o spmwhx.o spmwck.o spmwcv.o spmwcx.o spmjcb.o spmwbl.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack-mpi/src' Cleaning sopack-mpi/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack-mpi/src' rm -f somdnl.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack-mpi/src' Cleaning dkpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/dkpack/src' rm -f dkgaus.o dkjacb.o dka.o *~ make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/dkpack/src' echo "Cleaning lib" Cleaning lib rm -f ./libisp.a rm -f ./libisp.so rm -f ./ispack.f rm -f *~ rm -f */*~ rm -f */*/*~ rm -f */*/*.dat rm -f */*/*.out rm -f */doc/*.dvi rm -f */doc/*.log rm -f */doc/*.aux make[1]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70' rm -f `find . -name "*~"` rm -rf debian/tmp `find debian/* -type d ! -name CVS` debian/files* core rm -f debian/*substvars dpkg-source -b ispack-g77-0.70 dpkg-source: building ispack-g77 using existing ispack-g77_0.70.orig.tar.gz dpkg-source: building ispack-g77 in ispack-g77_0.70-1.diff.gz dpkg-source: building ispack-g77 in ispack-g77_0.70-1.dsc debian/rules build test -f debian/rules cp debian/control.g77 debian/control cp debian/Mkinclude.g77 Mkinclude make make[1]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70' Making bspack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/bspack/src' g77 -O -fPIC -c bsdmsg.f g77 -O -fPIC -c bsset0.f g77 -O -fPIC -c bscopy.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/bspack/src' Making ftpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ftpack/src' g77 -O -fPIC -c ftdmsg.f g77 -O -fPIC -c ftr.f g77 -O -fPIC -c ftz.f g77 -O -fPIC -c ftct.f g77 -O -fPIC -c ftst.f g77 -O -fPIC -c ftcm.f g77 -O -fPIC -c ftsm.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ftpack/src' Making tdpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/tdpack/src' g77 -O -fPIC -c tdrk4.f g77 -O -fPIC -c tdrk2.f g77 -O -fPIC -c tdbsm.f g77 -O -fPIC -c tdadm.f g77 -O -fPIC -c tdrkn.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/tdpack/src' Making n2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/n2pack/src' g77 -O -fPIC -c n2init.f g77 -O -fPIC -c n2s2ga.f g77 -O -fPIC -c n2g2sa.f g77 -O -fPIC -c n2ajbs.f g77 -O -fPIC -c n2swnl.f g77 -O -fPIC -c n2swck.f g77 -O -fPIC -c n2swnn.f g77 -O -fPIC -c n2swbl.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/n2pack/src' Making ndpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ndpack/src' g77 -O -fPIC -c ndc.f g77 -O -fPIC -c ndg.f g77 -O -fPIC -c ndv.f g77 -O -fPIC -c ndd.f g77 -O -fPIC -c ndt.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ndpack/src' Making stpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/stpack/src' g77 -O -fPIC -c stinit.f g77 -O -fPIC -c stl.f g77 -O -fPIC -c stnm2l.f g77 -O -fPIC -c stogrd.f g77 -O -fPIC -c stc.f g77 -O -fPIC -c sts2ga.f g77 -O -fPIC -c sts2va.f g77 -O -fPIC -c stsrva.f g77 -O -fPIC -c stg2sa.f g77 -O -fPIC -c stv2sa.f g77 -O -fPIC -c stvrsa.f g77 -O -fPIC -c stajba.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/stpack/src' Making smpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/smpack/src' g77 -O -fPIC -c smc.f g77 -O -fPIC -c smd.f g77 -O -fPIC -c smf.f g77 -O -fPIC -c smgaus.f g77 -O -fPIC -c sminit.f g77 -O -fPIC -c smnm2l.f g77 -O -fPIC -c smp.f g77 -O -fPIC -c smr.f g77 -O -fPIC -c sms.f g77 -O -fPIC -c smt.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/smpack/src' Making snpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack/src' g77 -O -fPIC -c sngaus.f g77 -O -fPIC -c sninit.f g77 -O -fPIC -c snkini.f cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET snt.F | sed '/^#/d' > snt.f g77 -O -fPIC -c snt.f g77 -O -fPIC -c snnm2l.f g77 -O -fPIC -c snomp.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack/src' Making sopack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack/src' g77 -O -fPIC -c soinit.f g77 -O -fPIC -c sot.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack/src' Making sppack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack/src' g77 -O -fPIC -c spnjcb.f g77 -O -fPIC -c spnini.f g77 -O -fPIC -c spmini.f g77 -O -fPIC -c spclap.f g77 -O -fPIC -c spclam.f g77 -O -fPIC -c spswnl.f g77 -O -fPIC -c spswck.f g77 -O -fPIC -c spswnv.f g77 -O -fPIC -c spswcv.f g77 -O -fPIC -c spswli.f g77 -O -fPIC -c spswlv.f cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET spswnw.F | sed '/^#/d' > spswnw.f g77 -O -fPIC -c spswnw.f cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET spswnx.F | sed '/^#/d' > spswnx.f g77 -O -fPIC -c spswnx.f g77 -O -fPIC -c spswbl.f g77 -O -fPIC -c spswhv.f g77 -O -fPIC -c spswhi.f cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET spswhw.F | sed '/^#/d' > spswhw.f g77 -O -fPIC -c spswhw.f cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET spswhx.F | sed '/^#/d' > spswhx.f g77 -O -fPIC -c spswhx.f g77 -O -fPIC -c spswcx.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack/src' Making appack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/appack/src' cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET appack.F | sed '/^#/d' > appack.f g77 -O -fPIC -c appack.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/appack/src' Making flpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/flpack/src' g77 -O -fPIC -c flpack.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/flpack/src' Making fepack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fepack/src' cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET fepack.F | sed '/^#/d' > fepack.f g77 -O -fPIC -c fepack.f fepack.f: In subroutine `feputi': fepack.f:28: warning: CALL FHUPUT(IU,ND,CD) 1 fepack.f:48: (continued): CALL FHUPUT(IU,4,IW) 2 Argument #3 of `fhuput' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `fegeti': fepack.f:37: warning: CALL FHUGET(IU,ND,CD) 1 fepack.f:62: (continued): CALL FHUGET(IU,4,IW) 2 Argument #3 of `fhuget' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `feputr': fepack.f:47: warning: CALL FLCEN4(ID(I),IW) 1 fepack.f:78: (continued): CALL FLCEN4(RD(I),IW) 2 Argument #1 of `flcen4' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f:28: warning: CALL FHUPUT(IU,ND,CD) 1 fepack.f:79: (continued): CALL FHUPUT(IU,4,IW) 2 Argument #3 of `fhuput' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `fegetr': fepack.f:37: warning: CALL FHUGET(IU,ND,CD) 1 fepack.f:90: (continued): CALL FHUGET(IU,4,IW) 2 Argument #3 of `fhuget' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f:47: warning: CALL FLCEN4(ID(I),IW) 1 fepack.f:91: (continued): CALL FLCEN4(IW,RD(I)) 2 Argument #2 of `flcen4' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `feputd': fepack.f:28: warning: CALL FHUPUT(IU,ND,CD) 1 fepack.f:104: (continued): CALL FHUPUT(IU,8,IW) 2 Argument #3 of `fhuput' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `fegetd': fepack.f:37: warning: CALL FHUGET(IU,ND,CD) 1 fepack.f:116: (continued): CALL FHUGET(IU,8,IW) 2 Argument #3 of `fhuget' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f:103: warning: CALL FLCEN8(DD(I),IW) 1 fepack.f:117: (continued): CALL FLCEN8(IW,DD(I)) 2 Argument #1 of `flcen8' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f:103: warning: CALL FLCEN8(DD(I),IW) 1 fepack.f:117: (continued): CALL FLCEN8(IW,DD(I)) 2 Argument #2 of `flcen8' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `feputs': fepack.f:47: warning: CALL FLCEN4(ID(I),IW) 1 fepack.f:129: (continued): CALL FLCEN4(RD,IW) 2 Argument #1 of `flcen4' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f:28: warning: CALL FHUPUT(IU,ND,CD) 1 fepack.f:130: (continued): CALL FHUPUT(IU,4,IW) 2 Argument #3 of `fhuput' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `fegets': fepack.f:37: warning: CALL FHUGET(IU,ND,CD) 1 fepack.f:141: (continued): CALL FHUGET(IU,4,IW) 2 Argument #3 of `fhuget' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f:47: warning: CALL FLCEN4(ID(I),IW) 1 fepack.f:142: (continued): CALL FLCEN4(IW,RD) 2 Argument #2 of `flcen4' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `feputl': fepack.f:28: warning: CALL FHUPUT(IU,ND,CD) 1 fepack.f:158: (continued): CALL FHUPUT(IU,8,IW) 2 Argument #3 of `fhuput' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f: In subroutine `fegetl': fepack.f:37: warning: CALL FHUGET(IU,ND,CD) 1 fepack.f:171: (continued): CALL FHUGET(IU,8,IW) 2 Argument #3 of `fhuget' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f:103: warning: CALL FLCEN8(DD(I),IW) 1 fepack.f:172: (continued): CALL FLCEN8(IW,DD) 2 Argument #1 of `flcen8' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] fepack.f:103: warning: CALL FLCEN8(DD(I),IW) 1 fepack.f:172: (continued): CALL FLCEN8(IW,DD) 2 Argument #2 of `flcen8' is one type at (2) but is some other type at (1) [info -f g77 M GLOBALS] make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fepack/src' Making fhpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fhpack/src' cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET fhpack.F | sed '/^#/d' > fhpack.f g77 -O -fPIC -c fhpack.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fhpack/src' Making c2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/c2pack/src' g77 -O -fPIC -c c2init.f g77 -O -fPIC -c c2s2ga.f g77 -O -fPIC -c c2g2sa.f g77 -O -fPIC -c c2ajbs.f g77 -O -fPIC -c c2ajcb.f g77 -O -fPIC -c c2ajc2.f g77 -O -fPIC -c c2ajb2.f g77 -O -fPIC -c c2swnl.f g77 -O -fPIC -c c2swck.f g77 -O -fPIC -c c2swbl.f g77 -O -fPIC -c c2swnn.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/c2pack/src' Making p2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p2pack/src' g77 -O -fPIC -c p2init.f cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET p2s2ga.F | sed '/^#/d' > p2s2ga.f g77 -O -fPIC -c p2s2ga.f cpp -C -DDIRECT -DIEEE -DASCII -DLEN -DET p2g2sa.F | sed '/^#/d' > p2g2sa.f g77 -O -fPIC -c p2g2sa.f g77 -O -fPIC -c p2ajbs.f g77 -O -fPIC -c p2swnl.f g77 -O -fPIC -c p2swnn.f g77 -O -fPIC -c p2swbl.f g77 -O -fPIC -c p2swck.f g77 -O -fPIC -c p2ajcb.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p2pack/src' Making p3pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack/src' g77 -O -fPIC -c p3init.f g77 -O -fPIC -c p3s2ga.f g77 -O -fPIC -c p3g2sa.f g77 -O -fPIC -c p3elnl.f g77 -O -fPIC -c p3cnsv.f g77 -O -fPIC -c p3espt.f g77 -O -fPIC -c p3getu.f g77 -O -fPIC -c p3geto.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack/src' Making p3pack-mpi/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack-mpi/src' mpif77 -O -c p3smga.f mpif77 -O -c p3gmsa.f mpif77 -O -c p3gmtu.f mpif77 -O -c p3gmto.f mpif77 -O -c p3emnl.f mpif77 -O -c p3cmsv.f mpif77 -O -c p3empt.f make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack-mpi/src' make[1]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70' touch build fakeroot debian/rules binary test -f debian/rules test root = "`whoami`" test -f debian/rules install -d debian/tmp-doc/usr/share/doc/ispack-doc/tex install -d debian/tmp-doc/usr/share/doc/ispack-doc/manual for i in bspack ftpack tdpack n2pack ndpack stpack smpack snpack sopack sppack appack flpack fepack fhpack c2pack p2pack p3pack p3pack-mpi ; do \ cd $i/doc ; \ if [ -f $i.tex ]; then \ cp $i.tex ../../debian/tmp-doc/usr/share/doc/ispack-doc/tex/ ; \ platex $i.tex ; dvipdfmx $i.dvi ; \ rm $i.aux $i.log $i.dvi ; \ mv $i.pdf ../../debian/tmp-doc/usr/share/doc/ispack-doc/manual/ ;\ fi ; \ cd ../.. ; \ done This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./bspack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file bspack.aux. [1] [2] (./bspack.aux) ) Output written on bspack.dvi (2 pages, 2884 bytes). Transcript written on bspack.log. bspack.dvi -> bspack.pdf [1][2] 15746 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./ftpack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file ftpack.aux. [1] Overfull \hbox (99.319pt too wide) in paragraph at lines 75--79 [][] Overfull \hbox (99.319pt too wide) in paragraph at lines 83--88 [][] Overfull \hbox (99.319pt too wide) in paragraph at lines 93--98 [][] Overfull \hbox (99.319pt too wide) in paragraph at lines 103--108 [][] Overfull \hbox (99.319pt too wide) in paragraph at lines 113--118 [][] Overfull \hbox (99.319pt too wide) in paragraph at lines 123--128 [][] Overfull \hbox (99.319pt too wide) in paragraph at lines 133--138 [][] [2] (/usr/share/texmf/tex/latex/base/omscmr.fd) Overfull \hbox (19.66426pt too wide) in paragraph at lines 189--197 [][] [3] Overfull \hbox (19.66426pt too wide) in paragraph at lines 258--266 [][] [4] [5] [6] [7] [8] [9] [10] (./ftpack.aux) ) (see the transcript file for additional information) Output written on ftpack.dvi (10 pages, 31512 bytes). Transcript written on ftpack.log. ftpack.dvi -> ftpack.pdf [1][2][3][4][5][6][7][8][9][10] 52733 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./tdpack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file tdpack.aux. [1] [2] [3] [4] [5] (./tdpack.aux) ) Output written on tdpack.dvi (5 pages, 14204 bytes). Transcript written on tdpack.log. tdpack.dvi -> tdpack.pdf [1][2][3][4][5] 36227 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./n2pack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/tex/latex/base/fleqn.clo) (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file n2pack.aux. (/usr/share/texmf/tex/latex/base/omscmr.fd) [1] [2] [3] [4] Overfull \hbox (11.1072pt too wide) in alignment at lines 318--358 [][][] [] [5] [6] Overfull \hbox (0.7466pt too wide) in paragraph at lines 530--531 []\OT1/cmtt/m/n/10 N2SWNL(LM,KM,JM,IM,BARPHI,F,AVT,DIV,PHI,DAVT,DDIV,DPHI,WS,WG ,ITJ,TJ,ITI,TI) [7] [8] [9] [10] (./n2pack.aux) ) (see the transcript file for additional information) Output written on n2pack.dvi (10 pages, 35424 bytes). Transcript written on n2pack.log. n2pack.dvi -> n2pack.pdf [1][2][3][4][5][6][7][8][9][10] 58464 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./stpack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file stpack.aux. [1] [2] [3] [4] [5] [6] Overfull \hbox (1.22427pt too wide) in paragraph at lines 521--523 []\JY1/mc/m/n/10 スペクトル逆変換 \OT1/cmr/m/n/10 (\JY1/mc/m/n/10 概要を参照\OT 1/cmr/m/n/10 ) \JY1/mc/m/n/10 によりスペクトルデ ータ \OT1/cmr/m/n/10 ($\OML/cm m/m/it/10 s[]$\OT1/cmr/m/n/10 ) \JY1/mc/m/n/10 から格子点上のグリ ッ ドデ ータ \OT1/cmr/m/n/10 ($\OML/cmm/m/it/10 g\OT1/cmr/m/n/10 (\OML/cmm/m/it/10 ^^U[]; '[ ]\OT1/cmr/m/n/10 )$) [7] Overfull \hbox (3.25368pt too wide) in paragraph at lines 551--555 []\OT1/cmr/m/n/10 (b) \OT1/cmtt/m/n/10 LTS2GZ \JY1/mc/m/n/10 は帯状成分 $\OML/c mm/m/it/10 m \OT1/cmr/m/n/10 = 0$ \JY1/mc/m/n/10 についてルジ ャ ンドル逆変換の 部分のみを行う\OT1/cmr/m/n/10 . \JY1/mc/m/n/10 この場合\OT1/cmr/m/n/10 , \OT1/c mtt/m/n/10 S(0:MM)\OT1/cmr/m/n/10 ,\OT1/cmtt/m/n/10 G(JM) Overfull \hbox (17.79005pt too wide) in paragraph at lines 556--562 \OT1/cmtt/m/n/10 G(JM,2) \JY1/mc/m/n/10 と宣言してあれば\OT1/cmr/m/n/10 , \OT1/ cmtt/m/n/10 S(N,1)\OT1/cmr/m/n/10 , \OT1/cmtt/m/n/10 S(N,2)\OT1/cmr/m/n/10 ,\OT 1/cmtt/m/n/10 G(J,1)\OT1/cmr/m/n/10 , \OT1/cmtt/m/n/10 G(J,2) \JY1/mc/m/n/10 に はそれぞれ $[]\OT1/cmr/m/n/10 (\OML/cmm/m/it/10 s[]\OT1/cmr/m/n/10 )$, $[](\OML /cmm/m/it/10 s[]\OT1/cmr/m/n/10 )$, $[](\OML/cmm/m/it/10 G[]\OT1/cmr/m/n/10 (\O ML/cmm/m/it/10 '[]\OT1/cmr/m/n/10 ))$, [8] [9] [10] Overfull \hbox (3.25368pt too wide) in paragraph at lines 768--772 []\OT1/cmr/m/n/10 (b) \OT1/cmtt/m/n/10 LTG2SZ \JY1/mc/m/n/10 は帯状成分 $\OML/c mm/m/it/10 m \OT1/cmr/m/n/10 = 0$ \JY1/mc/m/n/10 についてルジ ャ ンドル正変換の 部分のみを行う\OT1/cmr/m/n/10 . \JY1/mc/m/n/10 この場合\OT1/cmr/m/n/10 , \OT1/c mtt/m/n/10 S(0:MM)\OT1/cmr/m/n/10 ,\OT1/cmtt/m/n/10 G(JM) Overfull \hbox (17.79005pt too wide) in paragraph at lines 773--779 \OT1/cmtt/m/n/10 G(JM,2) \JY1/mc/m/n/10 と宣言してあれば\OT1/cmr/m/n/10 , \OT1/ cmtt/m/n/10 S(N,1)\OT1/cmr/m/n/10 , \OT1/cmtt/m/n/10 S(N,2)\OT1/cmr/m/n/10 ,\OT 1/cmtt/m/n/10 G(J,1)\OT1/cmr/m/n/10 , \OT1/cmtt/m/n/10 G(J,2) \JY1/mc/m/n/10 に はそれぞれ $[]\OT1/cmr/m/n/10 (\OML/cmm/m/it/10 s[]\OT1/cmr/m/n/10 )$, $[](\OML /cmm/m/it/10 s[]\OT1/cmr/m/n/10 )$, $[](\OML/cmm/m/it/10 G[]\OT1/cmr/m/n/10 (\O ML/cmm/m/it/10 '[]\OT1/cmr/m/n/10 ))$, [11] [12] [13] [14] (./stpack.aux) ) (see the transcript file for additional information) Output written on stpack.dvi (14 pages, 49736 bytes). Transcript written on stpack.log. stpack.dvi -> stpack.pdf [1][2][3][4][5][6][7][8][9][10][11][12][13][14] 72455 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./smpack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file smpack.aux. [1] [2] [3] [4] [5] [6] [7] Overfull \hbox (25.08842pt too wide) in paragraph at lines 559--562 []\OT1/cmr/m/n/10 (a) \OT1/cmtt/m/n/10 U(ID,JD,KM)\OT1/cmr/m/n/10 , \OT1/cmtt/m /n/10 V(ID,JD,KM) \JY1/mc/m/n/10 と宣言されている場合\OT1/cmr/m/n/10 , \OT1/cmt t/m/n/10 U(I,J,K)\OT1/cmr/m/n/10 , \OT1/cmtt/m/n/10 V(I,J,K) \JY1/mc/m/n/10 に は $\OML/cmm/m/it/10 u\OT1/cmr/m/n/10 (\OML/cmm/m/it/10 ^^U[]; '[]; z[]\OT1/cmr /m/n/10 )\OML/cmm/m/it/10 ; v\OT1/cmr/m/n/10 (\OML/cmm/m/it/10 ^^U[]; '[]; z[]\ OT1/cmr/m/n/10 )$ [8] [9] [10] [11] (./smpack.aux) ) (see the transcript file for additional information) Output written on smpack.dvi (11 pages, 40324 bytes). Transcript written on smpack.log. smpack.dvi -> smpack.pdf [1][2][3][4][5][6][7][8][9][10][11] 61977 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./snpack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/tex/latex/base/fleqn.clo) (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file snpack.aux. (/usr/share/texmf/tex/latex/base/omscmr.fd) [1] LaTeX Warning: Reference `sym' on page 2 undefined on input line 98. LaTeX Warning: Reference `rev' on page 2 undefined on input line 98. [2] [3] [4] Overfull \hbox (5.44136pt too wide) in paragraph at lines 344--350 []\OT1/cmtt/m/n/10 Y(JM/2,4) \JY1/mc/m/n/10 と宣言されている場合\OT1/cmr/m/n/10 , \OT1/cmtt/m/n/10 Y(J,1)\OT1/cmr/m/n/10 : $[](\OML/cmm/m/it/10 '[]\OT1/cmr/m/ n/10 )$, \OT1/cmtt/m/n/10 Y(J,2)\OT1/cmr/m/n/10 : $[]\OML/cmm/m/it/10 w[]$\OT1/ cmr/m/n/10 , \OT1/cmtt/m/n/10 Y(J,3)\OT1/cmr/m/n/10 : $[](\OML/cmm/m/it/10 '[]\ OT1/cmr/m/n/10 )$, [5] [6] Overfull \hbox (5.56221pt too wide) in paragraph at lines 475--484 \JY1/mc/m/n/10 こと\OT1/cmr/m/n/10 . \JY1/mc/m/n/10 または\OT1/cmr/m/n/10 , \JY 1/mc/m/n/10 さらに単純には\OT1/cmr/m/n/10 , \JY1/mc/m/n/10 やや余裕をも っ て\O T1/cmr/m/n/10 , \OT1/cmtt/m/n/10 KM*MAX((MM+4)*(MM+3),JD*3*(MM+1),JD*IM) [7] [8] [9] [10] (./snpack.aux) LaTeX Warning: There were undefined references. LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. ) (see the transcript file for additional information) Output written on snpack.dvi (10 pages, 36900 bytes). Transcript written on snpack.log. snpack.dvi -> snpack.pdf [1][2][3][4][5][6][7][8][9][10] 61867 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./sopack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/tex/latex/base/fleqn.clo) (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file sopack.aux. [1] Overfull \hbox (2.3861pt too wide) in paragraph at lines 131--162 [][] [2] (/usr/share/texmf/tex/latex/base/omscmr.fd) [3] (./sopack.aux) ) (see the transcript file for additional information) Output written on sopack.dvi (3 pages, 7928 bytes). Transcript written on sopack.log. sopack.dvi -> sopack.pdf [1][2][3] 30919 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./sppack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/tex/latex/base/fleqn.clo) (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file sppack.aux. [1] (/usr/share/texmf/tex/latex/base/omscmr.fd) [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] (./sppack.aux) ) Output written on sppack.dvi (22 pages, 71768 bytes). Transcript written on sppack.log. sppack.dvi -> sppack.pdf [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22] 87659 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./appack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file appack.aux. [1] (./appack.aux) ) Output written on appack.dvi (1 page, 1372 bytes). Transcript written on appack.log. appack.dvi -> appack.pdf [1] 13010 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./flpack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file flpack.aux. [1] Overfull \hbox (69.77808pt too wide) in paragraph at lines 87--87 []\OT1/cmr/bx/n/12 FLRBRE/FLRERB/FLDBDE/FLDEDB/FLDBRE/FLREDB/FLRBDE/FLDERB [2] [3] (./flpack.aux) ) (see the transcript file for additional information) Output written on flpack.dvi (3 pages, 6080 bytes). Transcript written on flpack.log. flpack.dvi -> flpack.pdf [1][2][3] 18900 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./fepack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file fepack.aux. (/usr/share/texmf/tex/latex/base/omscmr.fd) [1] [2] [3] [4] [5] [6] (./fepack.aux) ) Output written on fepack.dvi (6 pages, 9772 bytes). Transcript written on fepack.log. fepack.dvi -> fepack.pdf [1][2][3][4][5][6] 21925 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./fhpack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/pl209.def Entering pLaTeX 2.09 compatibility mode. (/usr/share/texmf/tex/latex/base/latex209.def Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* (/usr/share/texmf/tex/latex/base/tracefnt.sty) (/usr/share/texmf/tex/latex/base/latexsym.sty) (/usr/share/texmf/tex/latex/config/latex209.cfg) (/usr/share/texmf/tex/latex/tools/rawfonts.sty (/usr/share/texmf/tex/latex/tools/somedefs.sty) (/usr/share/texmf/tex/latex/base/ulasy.fd))) (/usr/share/texmf/ptex/platex/base/ptrace.sty)) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file fhpack.aux. (/usr/share/texmf/tex/latex/base/omscmr.fd) [1] [2] [3] [4] [5] (./fhpack.aux) ) Output written on fhpack.dvi (5 pages, 11368 bytes). Transcript written on fhpack.log. fhpack.dvi -> fhpack.pdf [1][2][3][4][5] 28038 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./c2pack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/tex/latex/base/fleqn.clo) (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file c2pack.aux. [1] (/usr/share/texmf/tex/latex/base/omscmr.fd) [2] [3] Overfull \hbox (63.45178pt too wide) in paragraph at lines 238--258 [][] [4] Overfull \hbox (82.6961pt too wide) in paragraph at lines 356--376 [][] [5] Overfull \hbox (3.9679pt too wide) in paragraph at lines 420--422 []\OT1/cmtt/m/n/10 CALL C2G2ST(JM,IM,G,W) CALL C2G2SA(LM,KM,JM,IM,W,S,WW,ITJ,TJ ,ITI,TI,ISW) [6] [7] [8] [9] Overfull \hbox (30.26466pt too wide) in alignment at lines 659--699 [][][] [] [10] [11] [12] [13] Overfull \hbox (5.99655pt too wide) in paragraph at lines 967--969 []\OT1/cmtt/m/n/10 C2SWNN(LM,KM,JM,IM,R,BARPHI,AVT,DIV,PHI,DAVT,DDIV,DPHI,WS,WG , ITJ,TJ,ITI,TI) [14] [15] [16] [17] (./c2pack.aux) ) (see the transcript file for additional information) Output written on c2pack.dvi (17 pages, 58412 bytes). Transcript written on c2pack.log. c2pack.dvi -> c2pack.pdf [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17] 77614 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./p2pack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/tex/latex/base/fleqn.clo) (/usr/share/texmf/ptex/platex/base/jsize10.clo)) No file p2pack.aux. [1] (/usr/share/texmf/tex/latex/base/omscmr.fd) [2] [3] [4] Overfull \hbox (30.26466pt too wide) in alignment at lines 324--364 [][][] [] [5] [6] [7] [8] Overfull \hbox (11.2465pt too wide) in paragraph at lines 611--612 []\OT1/cmtt/m/n/10 P2SWNN(LM,KM,JM,IM,R,BARPHI,F,AVT,DIV,PHI,DAVT,DDIV,DPHI,WS, WG,ITJ,TJ,ITI,TI) [9] [10] [11] (./p2pack.aux) ) (see the transcript file for additional information) Output written on p2pack.dvi (11 pages, 41260 bytes). Transcript written on p2pack.log. p2pack.dvi -> p2pack.pdf [1][2][3][4][5][6][7][8][9][10][11] 63691 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./p3pack.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/tex/latex/base/fleqn.clo) (/usr/share/texmf/ptex/platex/base/jsize10.clo)) (/usr/share/texmf/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texmf/tex/latex/amsmath/amstext.sty (/usr/share/texmf/tex/latex/amsmath/amsgen.sty)) (/usr/share/texmf/tex/latex/amsmath/amsbsy.sty) (/usr/share/texmf/tex/latex/amsmath/amsopn.sty)) (/usr/share/texmf/tex/latex/amsfonts/amssymb.sty (/usr/share/texmf/tex/latex/amsfonts/amsfonts.sty)) No file p3pack.aux. (/usr/share/texmf/tex/latex/amsfonts/umsa.fd) (/usr/share/texmf/tex/latex/amsfonts/umsb.fd) [1] (/usr/share/texmf/tex/latex/base/omscmr.fd) [2] [3] [4] [5] Overfull \hbox (46.07649pt too wide) in paragraph at lines 366--371 \JY1/mc/m/n/10 なる性質があるので\OT1/cmr/m/n/10 , $[] = (\OML/cmm/m/it/10 ![]; ![]; ![]\OT1/cmr/m/n/10 )$ \JY1/mc/m/n/10 の \OT1/cmr/m/n/10 3 \JY1/mc/m/n/10 成分は独立ではなく\OT1/cmr/m/n/10 , \JY1/mc/m/n/10 その展開係数 $\OT1/cmr/m/n/1 0 (([])[]\OML/cmm/m/it/10 ; \OT1/cmr/m/n/10 ([])[]\OML/cmm/m/it/10 ; \OT1/cmr/m /n/10 ([])[]) [6] [7] [8] [9] [10] [11] (./p3pack.aux) ) (see the transcript file for additional information) Output written on p3pack.dvi (11 pages, 38460 bytes). Transcript written on p3pack.log. p3pack.dvi -> p3pack.pdf [1][2][3][4][5][6][7][8][9][10][11] 64190 bytes written This is pTeX, Version 3.14159-p3.1.5 (euc) (Web2C 7.4.5) (./p3pack-mpi.tex pLaTeX2e <2005/01/04>+0 (based on LaTeX2e <2001/06/01> patch level 0) (/usr/share/texmf/ptex/platex/base/jarticle.cls Document Class: jarticle 2002/04/09 v1.4 Standard pLaTeX class (/usr/share/texmf/tex/latex/base/fleqn.clo) (/usr/share/texmf/ptex/platex/base/jsize10.clo)) (/usr/share/texmf/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texmf/tex/latex/amsmath/amstext.sty (/usr/share/texmf/tex/latex/amsmath/amsgen.sty)) (/usr/share/texmf/tex/latex/amsmath/amsbsy.sty) (/usr/share/texmf/tex/latex/amsmath/amsopn.sty)) (/usr/share/texmf/tex/latex/amsfonts/amssymb.sty (/usr/share/texmf/tex/latex/amsfonts/amsfonts.sty)) No file p3pack-mpi.aux. (/usr/share/texmf/tex/latex/amsfonts/umsa.fd) (/usr/share/texmf/tex/latex/amsfonts/umsb.fd) [1] Overfull \hbox (22.37456pt too wide) in paragraph at lines 91--101 \JY1/mc/m/n/10 を各プロセスが波数 \OT1/cmtt/m/n/10 J \JY1/mc/m/n/10 が \OT1/cmt t/m/n/10 JS$\OMS/cmsy/m/n/10 ^^T$\OT1/cmtt/m/n/10 J$\OMS/cmsy/m/n/10 ^^T$\OT1/c mtt/m/n/10 JE \JY1/mc/m/n/10 の範囲にあるものを \OT1/cmtt/m/n/10 G(0:KM-1,0:IM- 1,JS\OT1/cmr/m/n/10 ,$[]$,\OT1/cmtt/m/n/10 G(0:KM-1,0:IM-1,JE) [2] [3] [4] [5] [6] [7] [8] [9] (./p3pack-mpi.aux) ) (see the transcript file for additional information) Output written on p3pack-mpi.dvi (9 pages, 27336 bytes). Transcript written on p3pack-mpi.log. p3pack-mpi.dvi -> p3pack-mpi.pdf [1][2][3][4][5][6][7][8][9] 45513 bytes written dh_installdocs -pispack-doc -Pdebian/tmp-doc sample \ README TODO COPYRIGHT LGPL VERSION debian/README.debian dh_installchangelogs -pispack-doc -Pdebian/tmp-doc CHANGELOG dh_compress -X.pdf -X.tex -X.f -pispack-g77 -Pdebian/tmp-doc dh_installdeb -pispack-doc -Pdebian/tmp-doc dpkg-gencontrol -isp -pispack-doc -Pdebian/tmp-doc chown -R root.root debian/tmp-doc chmod -R go=rX debian/tmp-doc dpkg --build debian/tmp-doc .. dpkg-deb: ../ispack-doc_0.70-1_all.deb にパッケージ `ispack-doc' を構築しています test -f debian/rules rm -rf debian/tmp `find debian/* -type d` install -d debian/tmp cd debian/tmp && install -d `cat ../dirs` make shared make[1]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70' Making bspack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/bspack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/bspack/src' Making ftpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ftpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ftpack/src' Making tdpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/tdpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/tdpack/src' Making n2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/n2pack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/n2pack/src' Making ndpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ndpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ndpack/src' Making stpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/stpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/stpack/src' Making smpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/smpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/smpack/src' Making snpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack/src' Making sopack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack/src' Making sppack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack/src' Making appack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/appack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/appack/src' Making flpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/flpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/flpack/src' Making fepack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fepack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fepack/src' Making fhpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fhpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fhpack/src' Making c2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/c2pack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/c2pack/src' Making p2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p2pack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p2pack/src' Making p3pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack/src' Making p3pack-mpi/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack-mpi/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack-mpi/src' gcc -shared -Wl,-soname,libisp-g77.so -o `pwd`/debian/tmp/usr/lib/libisp-g77.so */src/*.o make[1]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70' make static make[1]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70' Making bspack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/bspack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/bspack/src' Making ftpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ftpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ftpack/src' Making tdpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/tdpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/tdpack/src' Making n2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/n2pack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/n2pack/src' Making ndpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ndpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/ndpack/src' Making stpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/stpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/stpack/src' Making smpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/smpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/smpack/src' Making snpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/snpack/src' Making sopack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sopack/src' Making sppack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/sppack/src' Making appack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/appack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/appack/src' Making flpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/flpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/flpack/src' Making fepack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fepack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fepack/src' Making fhpack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fhpack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/fhpack/src' Making c2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/c2pack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/c2pack/src' Making p2pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p2pack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p2pack/src' Making p3pack/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack/src' Making p3pack-mpi/src make[2]: Entering directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack-mpi/src' make[2]: `all' に対して行うべき事はありません。 make[2]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/p3pack-mpi/src' ar vru `pwd`/debian/tmp/usr/lib/libisp-g77.a */src/*.o ar: /home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70/debian/tmp/usr/lib/libisp-g77.a を作成します a - appack/src/appack.o a - bspack/src/bscopy.o a - bspack/src/bsdmsg.o a - bspack/src/bsset0.o a - c2pack/src/c2ajb2.o a - c2pack/src/c2ajbs.o a - c2pack/src/c2ajc2.o a - c2pack/src/c2ajcb.o a - c2pack/src/c2g2sa.o a - c2pack/src/c2init.o a - c2pack/src/c2s2ga.o a - c2pack/src/c2swbl.o a - c2pack/src/c2swck.o a - c2pack/src/c2swnl.o a - c2pack/src/c2swnn.o a - fepack/src/fepack.o a - fhpack/src/fhpack.o a - flpack/src/flpack.o a - ftpack/src/ftcm.o a - ftpack/src/ftct.o a - ftpack/src/ftdmsg.o a - ftpack/src/ftr.o a - ftpack/src/ftsm.o a - ftpack/src/ftst.o a - ftpack/src/ftz.o a - n2pack/src/n2ajbs.o a - n2pack/src/n2g2sa.o a - n2pack/src/n2init.o a - n2pack/src/n2s2ga.o a - n2pack/src/n2swbl.o a - n2pack/src/n2swck.o a - n2pack/src/n2swnl.o a - n2pack/src/n2swnn.o a - ndpack/src/ndc.o a - ndpack/src/ndd.o a - ndpack/src/ndg.o a - ndpack/src/ndt.o a - ndpack/src/ndv.o a - p2pack/src/p2ajbs.o a - p2pack/src/p2ajcb.o a - p2pack/src/p2g2sa.o a - p2pack/src/p2init.o a - p2pack/src/p2s2ga.o a - p2pack/src/p2swbl.o a - p2pack/src/p2swck.o a - p2pack/src/p2swnl.o a - p2pack/src/p2swnn.o a - p3pack-mpi/src/p3cmsv.o a - p3pack-mpi/src/p3emnl.o a - p3pack-mpi/src/p3empt.o a - p3pack-mpi/src/p3gmsa.o a - p3pack-mpi/src/p3gmto.o a - p3pack-mpi/src/p3gmtu.o a - p3pack-mpi/src/p3smga.o a - p3pack/src/p3cnsv.o a - p3pack/src/p3elnl.o a - p3pack/src/p3espt.o a - p3pack/src/p3g2sa.o a - p3pack/src/p3geto.o a - p3pack/src/p3getu.o a - p3pack/src/p3init.o a - p3pack/src/p3s2ga.o a - smpack/src/smc.o a - smpack/src/smd.o a - smpack/src/smf.o a - smpack/src/smgaus.o a - smpack/src/sminit.o a - smpack/src/smnm2l.o a - smpack/src/smp.o a - smpack/src/smr.o a - smpack/src/sms.o a - smpack/src/smt.o a - snpack/src/sngaus.o a - snpack/src/sninit.o a - snpack/src/snkini.o a - snpack/src/snnm2l.o a - snpack/src/snomp.o a - snpack/src/snt.o a - sopack/src/soinit.o a - sopack/src/sot.o a - sppack/src/spclam.o a - sppack/src/spclap.o a - sppack/src/spmini.o a - sppack/src/spnini.o a - sppack/src/spnjcb.o a - sppack/src/spswbl.o a - sppack/src/spswck.o a - sppack/src/spswcv.o a - sppack/src/spswcx.o a - sppack/src/spswhi.o a - sppack/src/spswhv.o a - sppack/src/spswhw.o a - sppack/src/spswhx.o a - sppack/src/spswli.o a - sppack/src/spswlv.o a - sppack/src/spswnl.o a - sppack/src/spswnv.o a - sppack/src/spswnw.o a - sppack/src/spswnx.o a - stpack/src/stajba.o a - stpack/src/stc.o a - stpack/src/stg2sa.o a - stpack/src/stinit.o a - stpack/src/stl.o a - stpack/src/stnm2l.o a - stpack/src/stogrd.o a - stpack/src/sts2ga.o a - stpack/src/sts2va.o a - stpack/src/stsrva.o a - stpack/src/stv2sa.o a - stpack/src/stvrsa.o a - tdpack/src/tdadm.o a - tdpack/src/tdbsm.o a - tdpack/src/tdrk2.o a - tdpack/src/tdrk4.o a - tdpack/src/tdrkn.o ranlib `pwd`/debian/tmp/usr/lib/libisp-g77.a make[1]: Leaving directory `/home/takepiro/work/spmodel-dvlop/ruby-ispack/ispack-g77-0.70' dh_installdocs -pispack-g77 -Pdebian/tmp \ README TODO COPYRIGHT LGPL VERSION dh_installchangelogs CHANGELOG dh_strip -pispack-g77 -Pdebian/tmp dh_compress -pispack-g77 -Pdebian/tmp dh_fixperms -pispack-g77 -Pdebian/tmp dh_installdeb -pispack-g77 -Pdebian/tmp dpkg-gencontrol -isp -pispack-g77 -Pdebian/tmp dpkg-gencontrol: warning: unknown substitution variable ${shlibs:Depends} chown -R root.root debian/tmp chmod -R go=rX debian/tmp dpkg --build debian/tmp .. dpkg-deb: ../ispack-g77_0.70-1_i386.deb にパッケージ `ispack-g77' を構築しています dpkg-genchanges dpkg-genchanges: including full source code in upload dpkg-buildpackage: full upload (original source is included)