Path: | physics/phy_adjust_fixed_test.f90 |
Last Update: | Wed May 14 00:15:23 +0900 2008 |
Authors: | Yasuhiro MORIKAWA |
Version: | $Id: phy_adjust_fixed_test.f90,v 1.1 2008-05-13 15:15:23 morikawa Exp $ |
Tag Name: | $Name: dcpam4-20080624-1 $ |
Copyright: | Copyright (C) GFD Dennou Club, 2008. All rights reserved. |
License: | See COPYRIGHT |
Note that Japanese and English are described in parallel.
phy_adjust_fixed モジュールの動作テストを行うためのプログラムです. このプログラムがコンパイルできること, および実行時に プログラムが正常終了することを確認してください.
This program checks the operation of "phy_adjust_fixed" module. Confirm compilation and execution of this program.
Main Program : |
program phy_adjust_fixed_test use phy_adjust_fixed, only: PHYADJFIX, PhyAdjFixCreate, AdjustFixed, PhyAdjFixClose, PhyAdjFixPutLine, PhyAdjFixInitialized, PhyAdjFixSetTime use dc_test, only: AssertEqual, AssertGreaterThan, AssertLessThan use dc_types, only: DP, STRING use dc_string, only: StoA, PutLine, toChar use dc_args, only: ARGS, DCArgsOpen, DCArgsHelpMsg, DCArgsOption, DCArgsDebug, DCArgsHelp, DCArgsStrict, DCArgsClose use gt4_history, only: GT_HISTORY, HistoryCreate, HistoryAddVariable, HistoryPut, HistoryClose, HistoryAddAttr, HistoryGet implicit none !------------------------------------------------------------------- ! 実験の表題, モデルの名称, 所属機関名 ! Title of a experiment, name of model, sub-organ !------------------------------------------------------------------- character(*), parameter:: title = 'phy_adjust_fixed_test $Name: dcpam4-20080624-1 $ :: ' // 'Test program of "phy_adjust_fixed" module' character(*), parameter:: source = 'dcmodel project: hierarchical numerical models ' // '(See http://www.gfd-dennou.org/library/dcmodel)' character(*), parameter:: institution = 'GFD Dennou Club (See http://www.gfd-dennou.org)' !------------------------------------------------------------------- ! 格子点数・最大全波数 ! Grid points and maximum truncated wavenumber !------------------------------------------------------------------- integer, parameter:: imax = 32 ! 経度格子点数. ! Number of grid points in longitude integer, parameter:: jmax = 16 ! 緯度格子点数. ! Number of grid points in latitude integer, parameter:: kmax = 8 ! 鉛直層数. ! Number of vertical level !------------------------------------------------------------------- ! 軸データ ! Axes data !------------------------------------------------------------------- real(DP):: x_Lon (0:imax-1) ! 経度. Longitude real(DP):: y_Lat (0:jmax-1) ! 緯度. Latitude real(DP):: z_Sigma (0:kmax-1) ! $ \sigma $ レベル (整数). ! Full $ \sigma $ level real(DP):: r_Sigma (0:kmax) ! $ \sigma $ レベル (半整数). ! Half $ \sigma $ level real(DP):: x_Lon_Weight (0:imax-1) ! 経度積分用座標重み. ! Weight for integration in longitude real(DP):: y_Lat_Weight (0:jmax-1) ! 緯度積分用座標重み. ! Weight for integration in latitude real(DP):: z_DelSigma (0:kmax-1) ! $ \Delta \sigma $ (整数). ! $ \Delta \sigma $ (Full) !------------------------------------------------------------------- ! 物理量 ! Physical values !------------------------------------------------------------------- real(DP):: xyz_Temp (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ T $ . 温度. Temperature real(DP):: xyz_TempAns (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ T $ . 温度. Temperature real(DP):: xyz_QVap (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ q $ . 比湿. Specific humidity real(DP):: xyz_QVapAns (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ q $ . 比湿. Specific humidity real(DP):: xy_Ps (0:imax-1, 0:jmax-1) ! $ p_s $ . 地表面気圧. Surface pressure real(DP):: xyz_DTempDtFixed (0:imax-1,0:jmax-1,0:0) ! $ DP{T}{t} $ . ! 固定値への調節に関する温度の変化率 ! Temperature tendency by adjustment to fixed value real(DP):: xyz_DTempDtFixedAns (0:imax-1,0:jmax-1,0:0) ! $ DP{T}{t} $ . ! 固定値への調節に関する温度の変化率 ! Temperature tendency by adjustment to fixed value real(DP):: xyz_DQVapDtFixed (0:imax-1,0:jmax-1,0:0) ! $ q $ . ! 固定値への調節に関する比湿の変化率 ! Specific humidity tendency by adjustment to fixed value real(DP):: xyz_DQVapDtFixedAns (0:imax-1,0:jmax-1,0:0) ! $ q $ . ! 固定値への調節に関する比湿の変化率 ! Specific humidity tendency by adjustment to fixed value !------------------------------------------------------------------- ! 定数 ! Constants !------------------------------------------------------------------- real(DP), parameter:: Cp = 11900.9264_DP ! $ C_p $ [J kg-1 K-1]. 大気定圧比熱. Specific heat of air at constant pressure. ! Sugiyama et al. (2008) で用いられている値を使用. ! A value used in Sugiyama et al. (2008) is used. real(DP), parameter:: RAir = 3611.44466_DP ! $ R $ [J kg-1 K-1]. 大気気体定数. Gas constant of air. ! Sugiyama et al. (2008) で用いられている値を使用. real(DP), parameter:: PI = 3.1415926535897930_DP ! $ \pi $ . 円周率. Circular constant !------------------------------------------------------------------- ! 作業変数 ! Work variables !------------------------------------------------------------------- integer:: i, k ! DO ループ用作業変数 ! Work variables for DO loop type(ARGS):: arg ! コマンドライン引数. ! Command line options logical:: OPT_namelist ! -N, --namelist オプションの有無. ! Existence of '-N', '--namelist' option character(STRING):: VAL_namelist ! -N, --namelist オプションの値. ! Value of '-N', '--namelist' option type(PHYADJFIX):: phy_adj_fix00, phy_adj_fix01 !!$ type(PHYADJFIX):: phy_adj_fix02, phy_adj_fix03 logical:: err character(*), parameter:: subname = 'phy_adjust_fixed_test' continue !------------------------------------------------------------------- ! コマンドライン引数の処理 ! Command line options handling !------------------------------------------------------------------- call cmdline_optparse ! これは内部サブルーチン. This is an internal subroutine !------------------------------------------------------------------- ! 軸データの設定 ! Configure axes data !------------------------------------------------------------------- call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'lon', array = x_Lon, quiet = .true. ) ! (out) x_Lon = x_Lon * PI / 180.0_DP call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'lon_weight', array = x_Lon_Weight, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'lat', array = y_Lat, quiet = .true. ) ! (out) y_Lat = y_Lat * PI / 180.0_DP call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'lat_weight', array = y_Lat_Weight, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'sig', array = z_Sigma, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'sigm', array = r_Sigma, quiet = .true. ) ! (out) do k = 0, kmax - 1 z_DelSigma(k) = r_Sigma(k) - r_Sigma(k+1) enddo !--------------------------------------------------------- ! データ入力 ! Input data !--------------------------------------------------------- call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'Temp', array = xyz_Temp, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'QVap', array = xyz_QVap, quiet = .true. ) ! (out) !------------------------------------------------------------------- ! 基本の初期設定, 終了処理テスト ! Basic initialization and termination test !------------------------------------------------------------------- call PhyAdjFixCreate( phy_adj_fix = phy_adj_fix00, imax = imax, jmax = jmax, kmax = 1, x_Lon = x_Lon, y_Lat = y_Lat, z_Sigma = z_Sigma, DelTime = 600.0_DP ) ! (in) call AssertEqual( 'basic initialization test 1', answer = .true., check = PhyAdjFixInitialized(phy_adj_fix00) ) !!$ call PhyAdjFixPutLine( phy_adj_fix = phy_adj_fix00 ) ! (in) call PhyAdjFixClose( phy_adj_fix = phy_adj_fix00 ) ! (inout) call AssertEqual( 'basic termination test 1', answer = .false., check = PhyAdjFixInitialized(phy_adj_fix00) ) call PhyAdjFixPutLine( phy_adj_fix = phy_adj_fix00 ) ! (in) !------------------------------------------------------------------- ! 重複初期設定に関するエラー処理のテスト ! Error handling related to duplicated initialization test !------------------------------------------------------------------- call PhyAdjFixCreate( phy_adj_fix = phy_adj_fix00, imax = imax, jmax = jmax, kmax = 1, x_Lon = x_Lon, y_Lat = y_Lat, z_Sigma = z_Sigma, DelTime = 600.0_DP ) ! (in) call PhyAdjFixCreate( phy_adj_fix = phy_adj_fix00, imax = imax, jmax = jmax, kmax = 1, x_Lon = x_Lon, y_Lat = y_Lat, z_Sigma = z_Sigma, DelTime = 600.0_DP, err = err ) ! (out) call AssertEqual( 'error handling related to duplicated initialization test 1', answer = .true., check = err ) !!$ call PhyAdjFixPutLine( phy_adj_fix = phy_adj_fix00 ) ! (in) call PhyAdjFixClose( phy_adj_fix = phy_adj_fix00 ) ! (inout) !------------------------------------------------------------------- ! 終了処理に関するエラー処理のテスト ! Error handling related to termination test !------------------------------------------------------------------- call PhyAdjFixClose( phy_adj_fix = phy_adj_fix00, err = err ) ! (out) call AssertEqual( 'error handling related to termination test 1', answer = .true., check = err ) !------------------------------------------------------------------- ! AdjustFixed テスト ! AdjustFixed test !------------------------------------------------------------------- call PhyAdjFixCreate( phy_adj_fix = phy_adj_fix00, imax = imax, jmax = jmax, kmax = 1, x_Lon = x_Lon, y_Lat = y_Lat, z_Sigma = z_Sigma, DelTime = 600.0_DP, x_Lon_Weight = x_Lon_Weight, y_Lat_Weight = y_Lat_Weight, z_DelSigma = z_DelSigma, TempFixed = 490.0_DP * z_Sigma(0) ** ( RAir / Cp ), QVapFixed = 0.00611641_DP ) ! (in) !!$ & QVapFixed = 0.00611641_DP, & ! (in) !!$ & history_varlist = 'DTempDtFixed,DQVapDtFixed', & ! (in) !!$ & history_interval_value = 1.0, & ! (in) !!$ & history_interval_unit = 'min', & ! (in) !!$ & history_precision = 'double', & ! (in) !!$ & history_fileprefix = 'tmp_' ) ! (in) !!$ call PhyAdjFixPutLine( phy_adj_fix = phy_adj_fix00 ) ! (in) call AdjustFixed( phy_adj_fix = phy_adj_fix00 ) ! (inout) xyz_Temp(:,:,0) = xyz_Temp(:,:,1) xyz_QVap(:,:,0) = xyz_QVap(:,:,1) call AdjustFixed( phy_adj_fix = phy_adj_fix00, xyz_Temp = xyz_Temp(:,:,0:0), xyz_QVap = xyz_QVap(:,:,0:0), xyz_DTempDtFixed = xyz_DTempDtFixed, xyz_DQVapDtFixed = xyz_DQVapDtFixed ) ! (out) call PhyAdjFixClose( phy_adj_fix = phy_adj_fix00 ) ! (inout) call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'Temp', array = xyz_TempAns, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_adjust_fixed_test00.nc', varname = 'QVap', array = xyz_QVapAns, quiet = .true. ) ! (out) xyz_TempAns(:,:,0) = 490.0_DP * z_Sigma(0) ** ( RAir / Cp ) xyz_QVapAns(:,:,0) = 0.00611641_DP call AssertEqual( 'AdjustFixed test 1-1', answer = xyz_TempAns(:,:,0:0), check = xyz_Temp(:,:,0:0), significant_digits = 15, ignore_digits = -15 ) call AssertEqual( 'AdjustFixed test 1-2', answer = xyz_QVapAns(:,:,0:0), check = xyz_QVap(:,:,0:0), significant_digits = 15, ignore_digits = -15 ) call HistoryGet ( file = 'phy_adjust_fixed_test01.nc', varname = 'DTempDtFixed', array = xyz_DTempDtFixedAns(:,:,0), quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_adjust_fixed_test01.nc', varname = 'DQVapDtFixed', array = xyz_DQVapDtFixedAns(:,:,0), quiet = .true. ) ! (out) call AssertEqual( 'AdjustFixed test 2-1', answer = xyz_DTempDtFixedAns, check = xyz_DTempDtFixed, significant_digits = 15, ignore_digits = -15 ) call AssertEqual( 'AdjustFixed test 2-2', answer = xyz_DQVapDtFixedAns, check = xyz_DQVapDtFixed, significant_digits = 15, ignore_digits = -15 ) !------------------------------------------------------------------- ! NAMELIST ファイルの読み込みテスト ! NAMELIST file loading test !------------------------------------------------------------------- call PhyAdjFixCreate( phy_adj_fix = phy_adj_fix01, imax = imax, jmax = jmax, kmax = 1, x_Lon = x_Lon, y_Lat = y_Lat, z_Sigma = z_Sigma, DelTime = 600.0_DP, nmlfile = VAL_namelist ) ! (in) xyz_Temp(:,:,0) = xyz_Temp(:,:,1) xyz_QVap(:,:,0) = xyz_QVap(:,:,1) call AdjustFixed( phy_adj_fix = phy_adj_fix01, xyz_Temp = xyz_Temp(:,:,0:0), xyz_QVap = xyz_QVap(:,:,0:0) ) ! (inout) xyz_TempAns(:,:,0) = 440.0_DP xyz_QVapAns(:,:,0) = 0.007_DP call AssertEqual( 'NAMELIST file loading test 1-1', answer = xyz_TempAns(:,:,0:0), check = xyz_Temp(:,:,0:0), significant_digits = 15, ignore_digits = -15 ) call AssertEqual( 'NAMELIST file loading test 1-2', answer = xyz_QVapAns(:,:,0:0), check = xyz_QVap(:,:,0:0), significant_digits = 15, ignore_digits = -15 ) !!$ call PhyAdjFixPutLine( phy_adj_fix = phy_adj_fix01 ) ! (in) call PhyAdjFixClose( phy_adj_fix = phy_adj_fix01 ) ! (inout) !------------------------------------------------------------------- ! 無効な値に関するエラー処理のテスト ! Error handling related to invalid values test !------------------------------------------------------------------- !!$ call PhyAdjFixCreate( & !!$ & phy_adj_fix = phy_adj_fix02, & ! (out) !!$ & imax = imax, jmax = jmax, & ! (in) !!$ & x_Lon = x_Lon, y_Lat = y_Lat, & ! (in) !!$ & CoefAlpha = - 0.0001_DP, DelTime = 0.5_DP, & ! (in) !!$ & err = err ) ! (out) !!$ call AssertEqual( 'error handling related to invalid values test 1', & !!$ & answer = .true., check = err ) !!$ call PhyAdjFixCreate( & !!$ & phy_adj_fix = phy_adj_fix02, & ! (inout) !!$ & imax = imax, jmax = jmax, & ! (in) !!$ & x_Lon = x_Lon, y_Lat = y_Lat, & ! (in) !!$ & CoefAlpha = 0.0001_DP, DelTime = - 0.5_DP, & ! (in) !!$ & err = err ) ! (out) !!$ call AssertEqual( 'error handling related to invalid values test 2', & !!$ & answer = .true., check = err ) !------------------------------------------------------------------- ! ヒストリデータ出力テスト ! History data output test !------------------------------------------------------------------- !!$ call PhyAdjFixCreate( & !!$ & phy_adj_fix = phy_adj_fix03, & ! (out) !!$ & imax = imax, jmax = jmax, & ! (in) !!$ & x_Lon = x_Lon, y_Lat = y_Lat, & ! (in) !!$ & CoefAlpha = 0.01_DP, DelTime = 0.5_DP, & ! (in) !!$ & current_time_value = 0.0, & ! (in) !!$ & current_time_unit = 'sec', & ! (in) !!$ & history_varlist = 'Data2', & ! (in) !!$ & history_interval_value = 2.0, & ! (in) !!$ & history_interval_unit = 'sec', & ! (in) !!$ & history_precision = 'float', & ! (in) !!$ & history_fileprefix = 'AP_' ) ! (in) !!$ call PhyAdjFixPutLine( phy_adj_fix = phy_adj_fix03 ) ! (in) !!$ !!$ do i = 0, imax-1 !!$ x_Data1(i) = i * 1.0_DP !!$ end do !!$ do j = 0, jmax-1 !!$ y_Data2(j) = j * 1.1_DP !!$ end do !!$ !!$ do i = 1, 12 !!$ call AdjustFixed( & !!$ & phy_adj_fix = phy_adj_fix03, & ! (inout) !!$ & x_Data1 = x_Data1, y_Data2 = y_Data2 ) ! (inout) !!$ end do !!$ !!$ call PhyAdjFixSetTime( & !!$ & phy_adj_fix = phy_adj_fix03, & ! (inout) !!$ & current_time_value = 1.0, current_time_unit = 'minute' ) ! (in) !!$ !!$ call AdjustFixed( & !!$ & phy_adj_fix = phy_adj_fix03, & ! (inout) !!$ & x_Data1 = x_Data1, y_Data2 = y_Data2, & ! (inout) !!$ & historyput_flag = .true. ) ! (in) !!$ !!$ call PhyAdjFixClose( phy_adj_fix = phy_adj_fix03 ) ! (inout) contains subroutine cmdline_optparse ! ! コマンドライン引数の処理を行います ! ! Handle command line options ! call DCArgsOpen( arg = arg ) ! (out) call DCArgsHelpMsg( arg = arg, category = 'Title', msg = title ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Usage', msg = './' // trim(subname) // ' [Options]' ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Source', msg = source ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Institution', msg = institution ) ! (in) call DCArgsOption( arg = arg, options = StoA('-N', '--namelist'), flag = OPT_namelist, value = VAL_namelist, help = "Namelist filename") ! (in) call DCArgsDebug( arg = arg ) ! (inout) call DCArgsHelp( arg = arg ) ! (inout) call DCArgsStrict( arg = arg ) ! (inout) call DCArgsClose( arg = arg ) ! (inout) end subroutine cmdline_optparse end program phy_adjust_fixed_test
Subroutine : |
コマンドライン引数の処理を行います
Handle command line options
subroutine cmdline_optparse ! ! コマンドライン引数の処理を行います ! ! Handle command line options ! call DCArgsOpen( arg = arg ) ! (out) call DCArgsHelpMsg( arg = arg, category = 'Title', msg = title ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Usage', msg = './' // trim(subname) // ' [Options]' ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Source', msg = source ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Institution', msg = institution ) ! (in) call DCArgsOption( arg = arg, options = StoA('-N', '--namelist'), flag = OPT_namelist, value = VAL_namelist, help = "Namelist filename") ! (in) call DCArgsDebug( arg = arg ) ! (inout) call DCArgsHelp( arg = arg ) ! (inout) call DCArgsStrict( arg = arg ) ! (inout) call DCArgsClose( arg = arg ) ! (inout) end subroutine cmdline_optparse