Path: | physics/phy_lscond_test.f90 |
Last Update: | Sat Jun 14 20:44:15 +0900 2008 |
Authors: | Yukiko YAMADA, Yasuhiro MORIKAWA |
Version: | $Id: phy_lscond_test.f90,v 1.8 2008-06-14 11:44:15 morikawa Exp $ |
Tag Name: | $Name: dcpam4-20080624-1 $ |
Copyright: | Copyright (C) GFD Dennou Club, 2007. All rights reserved. |
License: | See COPYRIGHT |
Note that Japanese and English are described in parallel.
phy_lscond モジュールの動作テストを行うためのプログラムです. このプログラムがコンパイルできること, および実行時に プログラムが正常終了することを確認してください.
This program checks the operation of "phy_lscond" module. Confirm compilation and execution of this program.
Main Program : |
program phy_lscond_test use phy_lscond, only: PHYLSC, Create, Close, PutLine, initialized, LScaleCond use constants, only: CONST, Create, Get use dc_test, only: AssertEqual, AssertGreaterThan, AssertLessThan use dc_types, only: DP, STRING use dc_string, only: StoA, PutLine use dc_args, only: ARGS, Open, HelpMsg, Option, Debug, Help, Strict, Close use gt4_history, only: GT_HISTORY, HistoryCreate, HistoryAddVariable, HistoryPut, HistoryClose, HistoryAddAttr, HistoryGet implicit none !--------------------------------------------------------- ! 実験の表題, モデルの名称, 所属機関名 ! Title of a experiment, name of model, sub-organ !--------------------------------------------------------- character(*), parameter:: title = 'phy_lscond_test $Name: dcpam4-20080624-1 $ :: ' // 'Test program of "phy_lscond" module' character(*), parameter:: source = 'dcpam4 ' // '(See http://www.gfd-dennou.org/library/dcpam)' character(*), parameter:: institution = 'GFD Dennou Club (See http://www.gfd-dennou.org)' !------------------------------------------------------------------- ! 格子点数・最大全波数 ! Grid points and maximum truncated wavenumber !------------------------------------------------------------------- integer, parameter:: imax = 32 ! 経度格子点数. ! Number of grid points in longitude integer, parameter:: jmax = 16 ! 緯度格子点数. ! Number of grid points in latitude integer, parameter:: kmax = 8 ! 鉛直層数. ! Number of vertical level !----------------------------------------------------------------- ! 物理定数等の設定 ! Configure physical constants etc. !----------------------------------------------------------------- type(CONST):: const_earth real(DP):: Grav ! $ g $ . 重力加速度. Gravitational acceleration real(DP):: Cp ! $ C_p $ . 大気定圧比熱. Specific heat of air at constant pressure real(DP):: EL ! $ L $ . 水の凝結の潜熱. Latent heat of condensation of water vapor real(DP):: RVap ! $ R_v $ . 水蒸気気体定数. Gas constant of water vapor real(DP):: EpsV ! $ \epsilon_v $ . 水蒸気分子量比. Molecular weight ratio of water vapor real(DP):: ES0 ! $ e^{*} $ (273K) . 0 ℃での飽和蒸気圧. Saturated vapor pressure at 0 degrees C real(DP):: DelTime ! $ \Delta t $ . タイムステップ. Time step !------------------------------------------------------------------- ! 軸データ ! Axes data !------------------------------------------------------------------- real(DP):: x_Lon (0:imax-1) ! 経度. Longitude real(DP):: y_Lat (0:jmax-1) ! 緯度. Latitude real(DP):: z_Sigma (0:kmax-1) ! $ \sigma $ レベル (整数). ! Full $ \sigma $ level real(DP):: r_Sigma (0:kmax) ! $ \sigma $ レベル (半整数). ! Half $ \sigma $ level real(DP):: x_Lon_Weight (0:imax-1) ! 経度積分用座標重み. ! Weight for integration in longitude real(DP):: y_Lat_Weight (0:jmax-1) ! 緯度積分用座標重み. ! Weight for integration in latitude real(DP):: z_DelSigma (0:kmax-1) ! $ \Delta \sigma $ (整数). ! $ \Delta \sigma $ (Full) !--------------------------------------------------------- ! 物理量 ! Physical values !--------------------------------------------------------- real(DP), parameter:: PI = 3.1415926535897930_DP ! $ \pi $ . 円周率. Circular constant real(DP):: xy_Ps (0:imax-1, 0:jmax-1) ! $ p_s $ . 地表面気圧. Surface pressure real(DP):: xyz_Temp (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ T $ . 温度. Temperature real(DP):: xyz_QVap (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ q $ . 比湿. Specific humidity real(DP):: xyz_Press (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ p_s $ . 地表面気圧 (整数レベル). ! Surface pressure (full level) real(DP):: xyr_Press (0:imax-1, 0:jmax-1, 0:kmax) ! $ p_s $ . 地表面気圧 (半整数レベル). ! Surface pressure (half level) real(DP):: xy_LscRain (0:imax-1, 0:jmax-1) ! 大規模凝結スキームによる降水量. ! Precipitation by large scale condensation scheme real(DP):: xyz_DLscTempDt (0:imax-1, 0:jmax-1, 0:kmax-1) ! 大規模凝結スキームによる温度変化率. ! Temperature tendency by large scale condensation scheme real(DP):: xyz_DLscQVapDt (0:imax-1, 0:jmax-1, 0:kmax-1) ! 大規模凝結スキームによる比湿変化率. ! Specific humidity tendency by large scale condensation scheme real(DP):: xyz_TempAns (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ T $ . 温度. Temperature real(DP):: xyz_QVapAns (0:imax-1, 0:jmax-1, 0:kmax-1) ! $ q $ . 比湿. Specific humidity real(DP):: xyz_DLscTempDtAns (0:imax-1, 0:jmax-1, 0:kmax-1) ! 大規模凝結スキームによる温度変化率. ! Temperature tendency by large scale condensation scheme real(DP):: xyz_DLscQVapDtAns (0:imax-1, 0:jmax-1, 0:kmax-1) ! 大規模凝結スキームによる比湿変化率. ! Specific humidity tendency by large scale condensation scheme real(DP):: xy_LscRainAns (0:imax-1, 0:jmax-1) ! 大規模凝結スキームによる降水量. ! Precipitation by large scale condensation scheme !------------------------------------------------------------------- ! データ入出力 ! Data I/O !------------------------------------------------------------------- type(GT_HISTORY):: gthist !--------------------------------------------------------- ! 作業変数 ! Work variables !--------------------------------------------------------- integer:: i, j, k ! DO ループ用作業変数 ! Work variables for DO loop type(ARGS):: arg ! コマンドライン引数. ! Command line arguments logical:: OPT_namelist ! -N, --namelist オプションの有無. ! Existence of '-N', '--namelist' option character(STRING):: VAL_namelist ! -N, --namelist オプションの値. ! Value of '-N', '--namelist' option type(PHYLSC):: phy_lsc00, phy_lsc01, phy_lsc02, phy_lsc03 logical:: err character(*), parameter:: subname = 'phy_lscond_test' continue !--------------------------------------------------------- ! コマンドライン引数の処理 ! Command line arguments handling !--------------------------------------------------------- call Open( arg ) call HelpMsg( arg, 'Title', title ) call HelpMsg( arg, 'Usage', './phy_lscond_test [Options]' ) call HelpMsg( arg, 'Source', source ) call HelpMsg( arg, 'Institution', institution ) call Option( arg, StoA('-N', '--namelist'), OPT_namelist, VAL_namelist, help = 'NAMELIST filename' ) call Debug( arg ) call Help( arg ) call Strict( arg, severe = .true. ) call Close( arg ) !--------------------------------------------------------- ! 物理定数の準備 ! Prepare physical constants !--------------------------------------------------------- call Create( const_earth ) ! (inout) DelTime = 600.0_DP call Get( constant = const_earth, Grav = Grav, Cp = Cp, EL = EL, RVap = RVap, EpsV = EpsV, ES0 = ES0 ) ! (out) !------------------------------------------------------------------- ! 軸データの設定 ! Configure axes data !------------------------------------------------------------------- call HistoryGet ( file = 'phy_lscond_test00.nc', varname = 'lon', array = x_Lon, quiet = .true. ) ! (out) x_Lon = x_Lon * PI / 180.0_DP call HistoryGet ( file = 'phy_lscond_test00.nc', varname = 'lon_weight', array = x_Lon_Weight, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_lscond_test00.nc', varname = 'lat', array = y_Lat, quiet = .true. ) ! (out) y_Lat = y_Lat * PI / 180.0_DP call HistoryGet ( file = 'phy_lscond_test00.nc', varname = 'lat_weight', array = y_Lat_Weight, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_lscond_test00.nc', varname = 'sig', array = z_Sigma, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_lscond_test00.nc', varname = 'sigm', array = r_Sigma, quiet = .true. ) ! (out) do k = 0, kmax - 1 z_DelSigma(k) = r_Sigma(k) - r_Sigma(k+1) enddo !--------------------------------------------------------- ! 初期設定テスト ! Initialization test !--------------------------------------------------------- call Create( phy_lsc = phy_lsc00, imax = imax, jmax = jmax, kmax = kmax, Grav = Grav, Cp = Cp, EL = EL, RVap = RVap, EpsV = EpsV, ES0 = ES0, DelTime = DelTime ) call AssertEqual( 'initialization test 1', answer = .true., check = initialized(phy_lsc00) ) call PutLine( phy_lsc = phy_lsc00 ) ! (in) !--------------------------------------------------------- ! データ入力 ! Input data !--------------------------------------------------------- call HistoryGet ( file = 'phy_lscond_test00.nc', varname = 'Temp', array = xyz_Temp, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_lscond_test00.nc', varname = 'Ps', array = xy_Ps, quiet = .true. ) ! (out) !!$ call HistoryGet ( & !!$ & file = 'phy_lscond_test00.nc', varname = 'QVap', & ! (in) !!$ & array = xyz_QVap, quiet = .true. ) ! (out) do k = 0, kmax - 1 xyz_Press(:,:,k) = xy_Ps * z_Sigma(k) end do do k = 0, kmax xyr_Press(:,:,k) = xy_Ps * r_Sigma(k) end do xyz_QVap = 1.0e-2 call HistoryGet ( file = 'phy_lscond_test01.nc', varname = 'Temp', array = xyz_TempAns, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_lscond_test01.nc', varname = 'QVap', array = xyz_QVapAns, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_lscond_test01.nc', varname = 'DLscTempDt', array = xyz_DLscTempDtAns, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_lscond_test01.nc', varname = 'DLscQVapDt', array = xyz_DLscQVapDtAns, quiet = .true. ) ! (out) call HistoryGet ( file = 'phy_lscond_test01.nc', varname = 'LscRain', array = xy_LscRainAns, quiet = .true. ) ! (out) !--------------------------------------------------------- ! LScaleCond テスト ! LScaleCond test !--------------------------------------------------------- !!$ xyz_Temp = 273.0_DP !!$ xyz_QVap = 1.0e-5_DP !!$ xyz_Press = 1.0e+6_DP !!$ xyr_Press = 1.0e+6_DP call LScaleCond( phy_lsc = phy_lsc00, xyz_Temp = xyz_Temp, xyz_QVap = xyz_QVap, xyz_Press = xyz_Press, xyr_Press = xyr_Press, xy_Rain = xy_LscRain, xyz_DTempDt = xyz_DLscTempDt, xyz_DQVapDt = xyz_DLscQVapDt ) ! (out) !!$ call PutLine ( xyz_Temp, indent = ' xyz_Temp=') !!$ call PutLine ( xyz_QVap, indent = ' xyz_QVap=') !!$ call PutLine ( xy_LscRain, indent = ' xy_LscRain=') !!$ call PutLine ( xyz_DLscTempDt, indent = ' xyz_DLscTempDt=') !!$ call PutLine ( xyz_DLscQvapDt, indent = ' xyz_DLscQvapDt=') call AssertEqual( 'LScaleCond test (Temp) ', answer = xyz_TempAns, check = xyz_Temp, significant_digits = 14, ignore_digits = -15 ) call AssertEqual( 'LScaleCond test (QVap) ', answer = xyz_QVapAns, check = xyz_QVap, significant_digits = 15, ignore_digits = -15 ) call AssertEqual( 'LScaleCond test (DLscTempDt)', answer = xyz_DLscTempDtAns, check = xyz_DLscTempDt, significant_digits = 15, ignore_digits = -15 ) call AssertEqual( 'LScaleCond test (DLscQVapDt)', answer = xyz_DLscQVapDtAns, check = xyz_DLscQVapDt, significant_digits = 15, ignore_digits = -15 ) call AssertEqual( 'LScaleCond test (LscRain)', answer = xy_LscRainAns, check = xy_LscRain, significant_digits = 14, ignore_digits = -15 ) !--------------------------------------------------------- ! 終了処理テスト ! Termination test !--------------------------------------------------------- call Close( phy_lsc = phy_lsc00 ) ! (inout) call AssertEqual( 'termination test 1', answer = .false., check = initialized(phy_lsc00) ) call PutLine( phy_lsc = phy_lsc00 ) ! (in) call Close( phy_lsc = phy_lsc02, err = err ) ! (out) call AssertEqual( 'termination test 2', answer = .true., check = err ) !!$ !---------------------------------------------------------------- !!$ ! データ出力 !!$ ! Output data !!$ !---------------------------------------------------------------- !!$ call HistoryCreate( & !!$ & history = gthist, & ! (out) !!$ & file = 'phy_lscond_test01.nc', & ! (in) !!$ & title = title, & ! (in) !!$ & source = source, institution = institution, & ! (in) !!$ & dims = StoA('lon', 'lat', 'sig', 'sigm'), & ! (in) !!$ & dimsizes = (/imax, jmax, kmax, kmax + 1/), & ! (in) !!$ & longnames = & !!$ & StoA('longitude', 'latitude', & !!$ & 'sigma at layer midpoints', & !!$ & 'sigma at layer end-points (half level)'), & ! (in) !!$ & units = StoA('degree_east', 'degree_north', & !!$ & '1', '1') ) ! (out) !!$ !!$ call HistoryPut( & !!$ & history = gthist, & ! (out) !!$ & varname = 'lon', array = x_Lon * 180.0_DP / PI ) ! (in) !!$ !!$ call HistoryPut( & !!$ & history = gthist, & ! (out) !!$ & varname = 'lat', array = y_Lat * 180.0_DP / PI ) ! (in) !!$ call HistoryPut( & !!$ & history = gthist, & ! (out) !!$ & varname = 'sig', array = z_Sigma ) ! (in) !!$ call HistoryPut( & !!$ & history = gthist, & ! (out) !!$ & varname = 'sigm', array = r_Sigma ) ! (in) !!$ !!$ call HistoryAddAttr( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'lon', attrname = 'standard_name', & ! (in) !!$ & value = 'longitude' ) ! (in) !!$ call HistoryAddAttr( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'lat', attrname = 'standard_name', & ! (in) !!$ & value = 'latitude' ) ! (in) !!$ !!$ call HistoryAddAttr( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'sig', attrname = 'standard_name', & ! (in) !!$ & value = 'atmosphere_sigma_coordinate' ) ! (in) !!$ call HistoryAddAttr( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'sigm', attrname = 'standard_name', & ! (in) !!$ & value = 'atmosphere_sigma_coordinate' ) ! (in) !!$ call HistoryAddAttr( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'sig', attrname = 'positive', & ! (in) !!$ & value = 'down' ) ! (in) !!$ call HistoryAddAttr( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'sigm', attrname = 'positive', & ! (in) !!$ & value = 'down' ) ! (in) !!$ !!$ !!$ call HistoryAddVariable( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'Temp', & ! (in) !!$ & dims = StoA('lon', 'lat', 'sig'), & ! (in) !!$ & longname = 'temperature', & ! (in) !!$ & units = 'K', xtype = 'double' ) ! (in) !!$ call HistoryPut( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'Temp', array = xyz_Temp ) ! (in) !!$ !!$ call HistoryAddVariable( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'QVap', & ! (in) !!$ & dims = StoA('lon', 'lat', 'sig'), & ! (in) !!$ & longname = 'specific humidity', & ! (in) !!$ & units = 'kg kg-1', xtype = 'double' ) ! (in) !!$ call HistoryPut( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'QVap', array = xyz_QVap ) ! (in) !!$ !!$ call HistoryAddVariable( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'DLscTempDt', & ! (in) !!$ & dims = StoA('lon', 'lat', 'sig'), & ! (in) !!$ & longname = 'large-scale condensation heating', & ! (in) !!$ & units = 'K s-1', xtype = 'double' ) ! (in) !!$ call HistoryPut( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'DLscTempDt', array = xyz_DLscTempDt ) ! (in) !!$ !!$ call HistoryAddVariable( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'DLscQVapDt', & ! (in) !!$ & dims = StoA('lon', 'lat', 'sig'), & ! (in) !!$ & longname = 'large-scale condensation moistening', & ! (in) !!$ & units = 'kg kg-1 s-1', xtype = 'double' ) ! (in) !!$ call HistoryPut( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'DLscQVapDt', array = xyz_DLscQVapDt ) ! (in) !!$ !!$ call HistoryAddVariable( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'LscRain', & ! (in) !!$ & dims = StoA('lon', 'lat'), & ! (in) !!$ & longname = 'precipitation by large scale condensation', & ! (in) !!$ & units = 'W m-2', xtype = 'double' ) ! (in) !!$ call HistoryPut( & !!$ & history = gthist, & ! (inout) !!$ & varname = 'LscRain', array = xy_LscRain ) ! (in) !!$ !!$ call HistoryClose( history = gthist ) ! (inout) end program phy_lscond_test