Path: | physics/phy_saturate_nha92_test.f90 |
Last Update: | Mon Apr 21 03:44:16 +0900 2008 |
Authors: | Masaki ISHIWATARI, Yasuhiro MORIKAWA |
Version: | $Id: phy_saturate_nha92_test.f90,v 1.5 2008-04-20 18:44:16 morikawa Exp $ |
Tag Name: | $Name: dcpam4-20080624-1 $ |
Copyright: | Copyright (C) GFD Dennou Club, 2008. All rights reserved. |
License: | See COPYRIGHT |
Note that Japanese and English are described in parallel.
phy_saturate_nha92 モジュールの動作テストを行うためのプログラムです. このプログラムがコンパイルできること, および実行時に プログラムが正常終了することを確認してください.
This program checks the operation of "phy_saturate_nha92" module. Confirm compilation and execution of this program.
Main Program : |
program phy_saturate_nha92_test use phy_saturate_nha92, only: PHYSATNHA, PhySatNhaCreate, CalcQVapSat, CalcDQVapSatDTemp, PhySatNhaClose, PhySatNhaPutLine, PhySatNhaInitialized !!$ & PhySatNhaSetTime use dc_test, only: AssertEqual, AssertGreaterThan, AssertLessThan use dc_types, only: DP, STRING use dc_string, only: StoA, PutLine use dc_args, only: ARGS, DCArgsOpen, DCArgsHelpMsg, DCArgsOption, DCArgsDebug, DCArgsHelp, DCArgsStrict, DCArgsClose implicit none !------------------------------------------------------------------- ! 実験の表題, モデルの名称, 所属機関名 ! Title of a experiment, name of model, sub-organ !------------------------------------------------------------------- character(*), parameter:: title = 'phy_saturate_nha92_test $Name: dcpam4-20080624-1 $ :: ' // 'Test program of "phy_saturate_nha92" module' character(*), parameter:: source = 'dcpam4 ' // '(See http://www.gfd-dennou.org/library/dcpam)' character(*), parameter:: institution = 'GFD Dennou Club (See http://www.gfd-dennou.org)' !------------------------------------------------------------------- ! 格子点数・最大全波数 ! Grid points and maximum truncated wavenumber !------------------------------------------------------------------- !!$ integer, parameter:: imax = 8 !!$ ! 経度格子点数. !!$ ! Number of grid points in longitude !!$ integer, parameter:: jmax = 4 !!$ ! 緯度格子点数. !!$ ! Number of grid points in latitude !------------------------------------------------------------------- ! 軸データ ! Axes data !------------------------------------------------------------------- !!$ real(DP):: x_Lon (0:imax-1) !!$ ! 経度. Longitude !!$ real(DP):: y_Lat (0:jmax-1) !!$ ! 緯度. Latitude !------------------------------------------------------------------- ! 物理量 ! Physical values !------------------------------------------------------------------- real(DP):: EpsV ! $ \epsilon_v $ . ! 水蒸気分子量比. Molecular weight ratio of water vapor real(DP), allocatable:: xyz_Temp (:,:,:) ! $ T $ . 温度. Temperature real(DP), allocatable:: xyz_Press (:,:,:) ! $ p $ . 気圧. ! Air pressure real(DP):: QVapSat ! $ q^{*} $ . 飽和比湿. ! Saturation specific humidity. real(DP), allocatable:: xy_QVapSat (:,:) ! $ q^{*} $ . 飽和比湿. ! Saturation specific humidity. real(DP), allocatable:: xyz_QVapSat (:,:,:) ! $ q^{*} $ . 飽和比湿. ! Saturation specific humidity. real(DP):: DQVapSatDTemp ! $ \DP{q^{*}}{T} $ . 飽和比湿の温度微分. ! Temperature derivative of saturation specific humidity. real(DP), allocatable:: xy_DQVapSatDTemp (:,:) ! $ \DP{q^{*}}{T} $ . 飽和比湿の温度微分. ! Temperature derivative of saturation specific humidity. real(DP), allocatable:: xyz_DQVapSatDTemp (:,:,:) ! $ \DP{q^{*}}{T} $ . 飽和比湿の温度微分. ! Temperature derivative of saturation specific humidity. !!$ real(DP):: x_Data1 (0:imax-1) !!$ ! データ 1. Data 1 !!$ real(DP):: y_Data2 (0:jmax-1) !!$ ! データ 2. Data 2 !------------------------------------------------------------------- ! 定数 ! Constants !------------------------------------------------------------------- !!$ real(DP), parameter:: PI = 3.1415926535897930_DP !!$ ! $ \pi $ . 円周率. Circular constant !------------------------------------------------------------------- ! 作業変数 ! Work variables !------------------------------------------------------------------- !!$ integer:: i, j ! DO ループ用作業変数 !!$ ! Work variables for DO loop type(ARGS):: arg ! コマンドライン引数. ! Command line options logical:: OPT_namelist ! -N, --namelist オプションの有無. ! Existence of '-N', '--namelist' option character(STRING):: VAL_namelist ! -N, --namelist オプションの値. ! Value of '-N', '--namelist' option type(PHYSATNHA):: phy_sat_nha00, phy_sat_nha01 !!$ type(PHYSATNHA):: phy_sat_nha02, phy_sat_nha03 logical:: err character(*), parameter:: subname = 'phy_saturate_nha92_test' continue !------------------------------------------------------------------- ! コマンドライン引数の処理 ! Command line options handling !------------------------------------------------------------------- call cmdline_optparse ! これは内部サブルーチン. This is an internal subroutine !------------------------------------------------------------------- ! 物理定数の設定 ! Configure physical constants !------------------------------------------------------------------- EpsV = 0.622646_DP !------------------------------------------------------------------- ! 軸データの設定 ! Configure axes data !------------------------------------------------------------------- !!$ x_Lon = (/ 0.0, 45.0, 90.0, 135.0, & !!$ & 180.0, 225.0, 270.0, 315.0 /) * PI / 180.0_DP !!$ y_Lat = (/ -59.4444, -19.8757, 19.8757, 59.4444 /) * PI / 180.0_DP !------------------------------------------------------------------- ! 基本の初期設定, 終了処理テスト ! Basic initialization and termination test !------------------------------------------------------------------- call PhySatNhaCreate( phy_sat_nha = phy_sat_nha00, imax = 1, jmax = 1, kmax = 1, EpsV = EpsV ) ! (in) call AssertEqual( 'basic initialization test 1', answer = .true., check = PhySatNhaInitialized(phy_sat_nha00) ) call PhySatNhaPutLine( phy_sat_nha = phy_sat_nha00 ) ! (in) call PhySatNhaClose( phy_sat_nha = phy_sat_nha00 ) ! (inout) call AssertEqual( 'basic termination test 1', answer = .false., check = PhySatNhaInitialized(phy_sat_nha00) ) call PhySatNhaPutLine( phy_sat_nha = phy_sat_nha00 ) ! (in) !------------------------------------------------------------------- ! 重複初期設定に関するエラー処理のテスト ! Error handling related to duplicated initialization test !------------------------------------------------------------------- call PhySatNhaCreate( phy_sat_nha = phy_sat_nha00, imax = 1, jmax = 1, kmax = 1, EpsV = EpsV ) ! (in) call PhySatNhaCreate( phy_sat_nha = phy_sat_nha00, imax = 1, jmax = 1, kmax = 1, EpsV = EpsV, err = err ) ! (out) call AssertEqual( 'error handling related to duplicated initialization test 1', answer = .true., check = err ) call PhySatNhaPutLine( phy_sat_nha = phy_sat_nha00 ) ! (in) call PhySatNhaClose( phy_sat_nha = phy_sat_nha00 ) ! (inout) !------------------------------------------------------------------- ! 終了処理に関するエラー処理のテスト ! Error handling related to termination test !------------------------------------------------------------------- call PhySatNhaClose( phy_sat_nha = phy_sat_nha00, err = err ) ! (out) call AssertEqual( 'error handling related to termination test 1', answer = .true., check = err ) !------------------------------------------------------------------- ! 飽和比湿計算テスト ! Saturation specific humidity calculation test !------------------------------------------------------------------- call PhySatNhaCreate( phy_sat_nha = phy_sat_nha01, imax = 1, jmax = 1, kmax = 1, EpsV = EpsV ) ! (in) allocate( xyz_Temp(1,1,1), xyz_Press(1,1,1) ) allocate( xy_QVapSat(1,1), xy_DQVapSatDTemp(1,1) ) allocate( xyz_QVapSat(1,1,1), xyz_DQVapSatDTemp(1,1,1) ) xyz_Temp(1,1,1) = 273.0_DP xyz_Press(1,1,1) = 1.0e+5_DP call CalcQVapSat( phy_sat_nha = phy_sat_nha01, Temp = xyz_Temp(1,1,1), Press = xyz_Press(1,1,1), QVapSat = QVapSat ) ! (out) call AssertEqual( 'CalcQVapSat test 1', answer = 3.866415753356e-3_DP, check = QVapSat, significant_digits = 15, ignore_digits = -15 ) call CalcQVapSat( phy_sat_nha = phy_sat_nha01, xy_Temp = xyz_Temp(:,:,1), xy_Press = xyz_Press(:,:,1), xy_QVapSat = xy_QVapSat ) ! (out) call AssertEqual( 'CalcQVapSat test 2', answer = 3.866415753356e-3_DP, check = xy_QVapSat(1,1), significant_digits = 15, ignore_digits = -15 ) call CalcQVapSat( phy_sat_nha = phy_sat_nha01, xyz_Temp = xyz_Temp, xyz_Press = xyz_Press, xyz_QVapSat = xyz_QVapSat ) ! (out) call AssertEqual( 'CalcQVapSat test 3', answer = 3.866415753356e-3_DP, check = xyz_QVapSat(1,1,1), significant_digits = 15, ignore_digits = -15 ) call CalcDQVapSatDTemp( phy_sat_nha = phy_sat_nha01, Temp = xyz_Temp(1,1,1), Press = xyz_Press(1,1,1), DQVapSatDTemp = DQVapSatDTemp ) ! (out) call AssertEqual( 'CalcDQVapSatDTemp test 1', answer = 2.724000794636e-4_DP, check = DQVapSatDTemp, significant_digits = 15, ignore_digits = -15 ) call CalcDQVapSatDTemp( phy_sat_nha = phy_sat_nha01, xy_Temp = xyz_Temp(:,:,1), xy_Press = xyz_Press(:,:,1), xy_DQVapSatDTemp = xy_DQVapSatDTemp ) ! (out) call AssertEqual( 'CalcDQVapSatDTemp test 2', answer = 2.724000794636e-4_DP, check = xy_DQVapSatDTemp(1,1), significant_digits = 15, ignore_digits = -15 ) call CalcDQVapSatDTemp( phy_sat_nha = phy_sat_nha01, xyz_Temp = xyz_Temp, xyz_Press = xyz_Press, xyz_DQVapSatDTemp = xyz_DQVapSatDTemp ) ! (out) call AssertEqual( 'CalcDQVapSatDTemp test 3', answer = 2.724000794636e-4_DP, check = xyz_DQVapSatDTemp(1,1,1), significant_digits = 15, ignore_digits = -15 ) call PhySatNhaClose( phy_sat_nha = phy_sat_nha01 ) ! (inout) !------------------------------------------------------------------- ! NAMELIST ファイルの読み込みテスト ! NAMELIST file loading test !------------------------------------------------------------------- !!$ call PhySatNhaCreate( & !!$ & phy_sat_nha = phy_sat_nha01, & ! (out) !!$ & imax = imax, jmax = jmax, & ! (in) !!$ & x_Lon = x_Lon, y_Lat = y_Lat, & ! (in) !!$ & CoefAlpha = - 0.0001_DP, DelTime = 0.5_DP, & ! (in) !!$ & nmlfile = VAL_namelist ) ! (in) !!$ call AssertEqual( 'NAMELIST file loading test 1', & !!$ & answer = .true., check = PhySatNhaInitialized(phy_sat_nha01) ) !!$ call PhySatNhaPutLine( phy_sat_nha = phy_sat_nha01 ) ! (in) !!$ call PhySatNhaClose( phy_sat_nha = phy_sat_nha01 ) ! (inout) !------------------------------------------------------------------- ! 無効な値に関するエラー処理のテスト ! Error handling related to invalid values test !------------------------------------------------------------------- !!$ call PhySatNhaCreate( & !!$ & phy_sat_nha = phy_sat_nha02, & ! (out) !!$ & imax = imax, jmax = jmax, & ! (in) !!$ & x_Lon = x_Lon, y_Lat = y_Lat, & ! (in) !!$ & CoefAlpha = - 0.0001_DP, DelTime = 0.5_DP, & ! (in) !!$ & err = err ) ! (out) !!$ call AssertEqual( 'error handling related to invalid values test 1', & !!$ & answer = .true., check = err ) !!$ call PhySatNhaCreate( & !!$ & phy_sat_nha = phy_sat_nha02, & ! (inout) !!$ & imax = imax, jmax = jmax, & ! (in) !!$ & x_Lon = x_Lon, y_Lat = y_Lat, & ! (in) !!$ & CoefAlpha = 0.0001_DP, DelTime = - 0.5_DP, & ! (in) !!$ & err = err ) ! (out) !!$ call AssertEqual( 'error handling related to invalid values test 2', & !!$ & answer = .true., check = err ) !------------------------------------------------------------------- ! ヒストリデータ出力テスト ! History data output test !------------------------------------------------------------------- !!$ call PhySatNhaCreate( & !!$ & phy_sat_nha = phy_sat_nha03, & ! (out) !!$ & imax = imax, jmax = jmax, & ! (in) !!$ & x_Lon = x_Lon, y_Lat = y_Lat, & ! (in) !!$ & CoefAlpha = 0.01_DP, DelTime = 0.5_DP, & ! (in) !!$ & current_time_value = 0.0, & ! (in) !!$ & current_time_unit = 'sec', & ! (in) !!$ & history_varlist = 'Data2', & ! (in) !!$ & history_interval_value = 2.0, & ! (in) !!$ & history_interval_unit = 'sec', & ! (in) !!$ & history_precision = 'float', & ! (in) !!$ & history_fileprefix = 'AP_' ) ! (in) !!$ call PhySatNhaPutLine( phy_sat_nha = phy_sat_nha03 ) ! (in) !!$ !!$ do i = 0, imax-1 !!$ x_Data1(i) = i * 1.0_DP !!$ end do !!$ do j = 0, jmax-1 !!$ y_Data2(j) = j * 1.1_DP !!$ end do !!$ !!$ do i = 1, 12 !!$ call PhySatNhaCalculation( & !!$ & phy_sat_nha = phy_sat_nha03, & ! (inout) !!$ & x_Data1 = x_Data1, y_Data2 = y_Data2 ) ! (inout) !!$ end do !!$ !!$ call PhySatNhaSetTime( & !!$ & phy_sat_nha = phy_sat_nha03, & ! (inout) !!$ & current_time_value = 1.0, current_time_unit = 'minute' ) ! (in) !!$ !!$ call PhySatNhaCalculation( & !!$ & phy_sat_nha = phy_sat_nha03, & ! (inout) !!$ & x_Data1 = x_Data1, y_Data2 = y_Data2, & ! (inout) !!$ & historyput_flag = .true. ) ! (in) !!$ !!$ call PhySatNhaClose( phy_sat_nha = phy_sat_nha03 ) ! (inout) contains subroutine cmdline_optparse ! ! コマンドライン引数の処理を行います ! ! Handle command line options ! call DCArgsOpen( arg = arg ) ! (out) call DCArgsHelpMsg( arg = arg, category = 'Title', msg = title ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Usage', msg = './' // trim(subname) // ' [Options]' ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Source', msg = source ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Institution', msg = institution ) ! (in) call DCArgsOption( arg = arg, options = StoA('-N', '--namelist'), flag = OPT_namelist, value = VAL_namelist, help = "Namelist filename") ! (in) call DCArgsDebug( arg = arg ) ! (inout) call DCArgsHelp( arg = arg ) ! (inout) call DCArgsStrict( arg = arg ) ! (inout) call DCArgsClose( arg = arg ) ! (inout) end subroutine cmdline_optparse end program phy_saturate_nha92_test
Subroutine : |
コマンドライン引数の処理を行います
Handle command line options
subroutine cmdline_optparse ! ! コマンドライン引数の処理を行います ! ! Handle command line options ! call DCArgsOpen( arg = arg ) ! (out) call DCArgsHelpMsg( arg = arg, category = 'Title', msg = title ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Usage', msg = './' // trim(subname) // ' [Options]' ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Source', msg = source ) ! (in) call DCArgsHelpMsg( arg = arg, category = 'Institution', msg = institution ) ! (in) call DCArgsOption( arg = arg, options = StoA('-N', '--namelist'), flag = OPT_namelist, value = VAL_namelist, help = "Namelist filename") ! (in) call DCArgsDebug( arg = arg ) ! (inout) call DCArgsHelp( arg = arg ) ! (inout) call DCArgsStrict( arg = arg ) ! (inout) call DCArgsClose( arg = arg ) ! (inout) end subroutine cmdline_optparse