Class surface_properties
In: surface_properties/surface_properties.f90

惑星表面特性の設定

Setting planetary surface properties

Note that Japanese and English are described in parallel.

海面温度や地表面諸量を設定します.

Data about sea surface temperature (SST) or various values on surface are set.

Procedures List

SetSurfaceProperties :惑星表面特性の設定
———— :————
SetSurfaceProperties :Setting surface properties

NAMELIST

NAMELIST#surface_properties_nml

Methods

Included Modules

dc_types dc_message gtool_history gridset dc_string read_time_series timeset constants_snowseaice surface_data albedo_Matthews Bucket_Model modify_albedo_snowseaice surface_properties_landoceancontrast roughlen_Matthews dc_iounit namelist_util

Public Instance methods

Subroutine :
xy_SurfMajCompIceB(0:imax-1, 1:jmax) :real(DP), intent(in ), optional
: $ M_mcs (t-\Delta t) $ . Surface major component ice amount (kg m-2)
xy_SoilMoistB(0:imax-1, 1:jmax) :real(DP), intent(in ), optional
: $ M_ws (t-\Delta t) $ . 土壌水分 (kg m-2) Soil moisture (kg m-2)
xy_SurfSnowB(0:imax-1, 1:jmax) :real(DP), intent(in ), optional
: $ M_ss (t-\Delta t) $ . 積雪量 (kg m-2) Surface snow amount (kg m-2)
xy_SurfTemp(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表面温度. Surface temperature
xy_SurfAlbedo(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表アルベド. Surface albedo
xy_SurfHumidCoef(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表湿潤度. Surface humidity coefficient
xy_SurfRoughLength(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表粗度長. Surface rough length
xy_SurfHeatCapacity(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表熱容量. Surface heat capacity
xy_DeepSubSurfHeatFlux(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地中熱フラックス. "Deep subsurface heat flux" Heat flux at the bottom of surface/soil layer.
xy_SurfCond(0:imax-1, 1:jmax) :integer , intent(inout), optional
: 惑星表面状態 (0: 固定, 1: 可変). Surface condition (0: fixed, 1: variable)
xy_SurfType(0:imax-1, 1:jmax) :integer , intent(inout), optional
: 惑星表面タイプ (土地利用) Surface type (land use)
xy_SurfHeight(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: $ z_s $ . 地表面高度. Surface height.
xy_SeaIceConc(0:imax-1,1:jmax) :real(DP), intent(inout), optional
: 海氷密度 (0 <= xy_SeaIceConc <= 1) Sea ice concentration (0 <= xy_SeaIceConc <= 1)
xy_SoilHeatCap(0:imax-1,1:jmax) :real(DP), intent(inout), optional
: 土壌熱容量 (J K-1 kg-1) Specific heat of soil (J K-1 kg-1)
xy_SoilHeatDiffCoef(0:imax-1,1:jmax) :real(DP), intent(inout), optional
: 土壌熱伝導率 (W m-1 K-1) Heat conduction coefficient of soil (W m-1 K-1)

惑星表面特性を設定します.

Set surface properties.

[Source]

  subroutine SetSurfaceProperties( xy_SurfMajCompIceB, xy_SoilMoistB, xy_SurfSnowB, xy_SurfTemp, xy_SurfAlbedo, xy_SurfHumidCoef, xy_SurfRoughLength, xy_SurfHeatCapacity, xy_DeepSubSurfHeatFlux, xy_SurfCond, xy_SurfType, xy_SurfHeight, xy_SeaIceConc, xy_SoilHeatCap, xy_SoilHeatDiffCoef )
    !
    ! 惑星表面特性を設定します. 
    !
    ! Set surface properties. 
    !

    ! モジュール引用 ; USE statements
    !

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: toChar

    ! gtool4 データ入力
    ! Gtool4 data input
    !
    use gtool_history, only: HistoryGet

    ! 時系列データの読み込み
    ! Reading time series
    !
    use read_time_series, only: SetValuesFromTimeSeriesWrapper

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, EndTime, TimesetClockStart, TimesetClockStop

    ! 雪と海氷の定数の設定
    ! Setting constants of snow and sea ice
    !
    use constants_snowseaice, only: SeaIceThreshold

    ! 地表面データ提供
    ! Prepare surface data
    !
    use surface_data, only: SetSurfData

    ! Matthews のデータに基づく惑星表面アルベド設定
    ! set surface albedo based on data by Matthews
    !
    use albedo_Matthews, only: SetAlbedoMatthews

    ! バケツモデル
    ! Bucket model
    !
    use Bucket_Model, only : BucketSetFlagOceanFromMatthewsIndex, BucketModHumidCoef

    ! 雪と海氷によるアルベド変化
    ! modification of surface albedo on the snow covered ground and on the sea ice
    !
    use modify_albedo_snowseaice, only: ModAlbedoDueToSnowSeaIce

    ! アルベド, 粗度長の設定, 陸面と海洋の差のみ考慮
    ! Set albedo and roughness length, only considering land-ocean contrast
    !
    use surface_properties_landoceancontrast, only: SetAlbedoLandOceanContrast, SetRoughLenLandOceanContrast

    ! Matthews のデータに基づく地面粗度の設定
    ! set roughness length on land surface based on data by Matthews
    !
    use roughlen_Matthews, only: SetRoughLenLandMatthews


    ! 宣言文 ; Declaration statements
    !
    real(DP), intent(in   ), optional:: xy_SurfMajCompIceB(0:imax-1, 1:jmax)
                              ! $ M_mcs (t-\Delta t) $ .
                              ! Surface major component ice amount (kg m-2)
    real(DP), intent(in   ), optional:: xy_SoilMoistB(0:imax-1, 1:jmax)
                              ! $ M_ws (t-\Delta t) $ . 土壌水分 (kg m-2)
                              ! Soil moisture (kg m-2)
    real(DP), intent(in   ), optional:: xy_SurfSnowB(0:imax-1, 1:jmax)
                              ! $ M_ss (t-\Delta t) $ . 積雪量 (kg m-2)
                              ! Surface snow amount (kg m-2)
    real(DP), intent(inout), optional:: xy_SurfTemp (0:imax-1, 1:jmax)
                              ! 地表面温度. 
                              ! Surface temperature
    real(DP), intent(inout), optional:: xy_SurfAlbedo (0:imax-1, 1:jmax)
                              ! 地表アルベド. 
                              ! Surface albedo
    real(DP), intent(inout), optional:: xy_SurfHumidCoef (0:imax-1, 1:jmax)
                              ! 地表湿潤度. 
                              ! Surface humidity coefficient
    real(DP), intent(inout), optional:: xy_SurfRoughLength (0:imax-1, 1:jmax)
                              ! 地表粗度長. 
                              ! Surface rough length
    real(DP), intent(inout), optional:: xy_SurfHeatCapacity (0:imax-1, 1:jmax)
                              ! 地表熱容量. 
                              ! Surface heat capacity
    real(DP), intent(inout), optional:: xy_DeepSubSurfHeatFlux (0:imax-1, 1:jmax)
                              ! 地中熱フラックス. 
                              ! "Deep subsurface heat flux"
                              ! Heat flux at the bottom of surface/soil layer.
    integer , intent(inout), optional:: xy_SurfCond (0:imax-1, 1:jmax)
                              ! 惑星表面状態 (0: 固定, 1: 可変). 
                              ! Surface condition (0: fixed, 1: variable)
    integer , intent(inout), optional:: xy_SurfType (0:imax-1, 1:jmax)
                              ! 惑星表面タイプ (土地利用)
                              ! Surface type (land use)
    real(DP), intent(inout), optional:: xy_SurfHeight (0:imax-1, 1:jmax)
                              ! $ z_s $ . 地表面高度. 
                              ! Surface height. 
    real(DP), intent(inout), optional:: xy_SeaIceConc(0:imax-1,1:jmax)
                              ! 海氷密度 (0 <= xy_SeaIceConc <= 1)
                              ! Sea ice concentration (0 <= xy_SeaIceConc <= 1)
    real(DP), intent(inout), optional:: xy_SoilHeatCap(0:imax-1,1:jmax)
                              ! 土壌熱容量 (J K-1 kg-1)
                              ! Specific heat of soil (J K-1 kg-1)
    real(DP), intent(inout), optional:: xy_SoilHeatDiffCoef(0:imax-1,1:jmax)
                              ! 土壌熱伝導率 (W m-1 K-1)
                              ! Heat conduction coefficient of soil (W m-1 K-1)

    ! 作業変数
    ! Work variables
    !
    real(DP), allocatable, save:: xy_SurfTempSave (:,:)
                              ! 地表面温度の保存値 (K)
                              ! Saved values of surface temperature (K)
    real(DP), allocatable, save:: xy_SeaIceConcSave(:,:)
                              ! 海氷面密度の保存値
                              ! Saved values of sea ice concentration
    real(DP), allocatable, save:: xy_SurfAlbedoSave(:,:)
                              ! アルベドの保存値
                              ! Saved values of albedo

    logical      :: xy_BucketFlagOceanGrid(0:imax-1,1:jmax)
                              !
                              ! Flag for ocean grid point used in bucket model

    logical, save:: flag_first_SurfCond            = .true.
                              ! 初回を示すフラグ. 
                              ! Flag that indicates first loop
                              !
    logical, save:: flag_first_SurfType            = .true.
    logical, save:: flag_first_SeaIceConc          = .true.
    logical, save:: flag_first_SurfTemp            = .true.
    logical, save:: flag_first_SurfHeight          = .true.
    logical, save:: flag_first_SurfAlbedo          = .true.
    logical, save:: flag_first_SurfHumidCoef       = .true.
    logical, save:: flag_first_SurfRoughLength     = .true.
    logical, save:: flag_first_SurfHeatCapacity    = .true.
    logical, save:: flag_first_DeepSubSurfHeatFlux = .true.
    logical, save:: flag_first_SoilHeatCap         = .true.
    logical, save:: flag_first_SoilHeatDiffCoef    = .true.

    logical:: flag_mpi_init

    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. surface_properties_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )


    flag_mpi_init = .true.


    ! NOTICE:
    ! The surface condition has to be set, before other fields are set.
    !
    ! 惑星表面状態
    ! Surface condition
    !
    if ( present(xy_SurfCond) ) then

      if ( SurfCondSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfCond ) then
          call HistoryGet( SurfCondFile, SurfCondName, xy_SurfCond, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
      else if ( SurfCondSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfCond ) then
          call SetSurfData( xy_SurfCond = xy_SurfCond )
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfCondSetting = %c is not appropriate.', c1 = trim(SurfCondSetting) )
      end if

      flag_first_SurfCond = .false.

    end if


    ! 惑星表面タイプ (土地利用)
    ! Surface type (land use)
    !
    if ( present(xy_SurfType) ) then

      if ( SurfTypeSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfType ) then
          call HistoryGet( SurfTypeFile, SurfTypeName, xy_SurfType, flag_mpi_split = flag_mpi_init )  ! (in) optional
!!$          do j = 1, jmax
!!$            do i = 0, imax-1
!!$              if ( xy_SurfType(i,j) >= 1 ) then
!!$                xy_SurfCond(i,j) = 1
!!$              else
!!$                xy_SurfCond(i,j) = 0
!!$              end if
!!$            end do
!!$          end do
!!$          call MessageNotify( 'M', module_name, ' xy_SurfCond is overwritten.' )
        end if
      else if ( SurfTypeSetting == 'same_as_SurfCond' ) then
        if ( .not. present( xy_SurfCond ) ) then
          call MessageNotify( 'E', module_name, ' The xy_SurfCond has to be present, when SurfTypeSetting = %c.', c1 = trim(SurfTypeSetting) )
        end if
        if ( flag_first_SurfType ) then
          xy_SurfType = xy_SurfCond
!!$          do j = 1, jmax
!!$            do i = 0, imax-1
!!$              if ( xy_SurfType(i,j) >= 1 ) then
!!$                xy_SurfCond(i,j) = 1
!!$              else
!!$                xy_SurfCond(i,j) = 0
!!$              end if
!!$            end do
!!$          end do
!!$          call MessageNotify( 'M', module_name, ' xy_SurfCond is overwritten.' )
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfTypeSetting = %c is not appropriate.', c1 = trim(SurfTypeSetting) )
      end if

      flag_first_SurfType = .false.

    end if


    ! NOTICE:
    ! The sea ice distribution has to be set, before set surface temperature. 
    !
    ! 海氷面密度
    ! Sea ice concentration
    !
    if ( present(xy_SeaIceConc) ) then

      if ( flag_first_SeaIceConc ) then
        ! 保存用変数の割付
        ! Allocate a variable for save
        !
        allocate( xy_SeaIceConcSave(0:imax-1, 1:jmax) )
      end if
      if ( SeaIceSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !

        ! This will be deleted near future (yot, 2010/10/11)
!!$        if ( flag_first_SeaIceConc ) then
!!$          call HistoryGet( &
!!$            & SeaIceFile, SeaIceName,          & ! (in)
!!$            & xy_SeaIceConcSave,               & ! (out)
!!$            & flag_mpi_split = flag_mpi_init )   ! (in) optional
!!$        end if
        call SetValuesFromTimeSeriesWrapper( SeaIceFile, SeaIceName, xy_SeaIceConcSave, 'SIC' )
      else if ( SeaIceSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SeaIceConc ) then
          call SetSurfData( xy_SeaIceConc = xy_SeaIceConcSave )
        end if
      else
        call MessageNotify( 'E', module_name, ' SeaIceSetting = %c is not appropriate.', c1 = trim(SeaIceSetting) )
      end if
      ! 海氷面密度の設定 ( xy_SurfCond == 0 の場所のみ )
      ! Setting of sea ice concentration ( where xy_SurfCond == 0 only )
      !
      xy_SeaIceConc = xy_SeaIceConcSave

      flag_first_SeaIceConc = .false.

    end if


    ! NOTICE:
    ! Before set surface temperature, sea ice distribution has to be set.
    !
    ! 地表面温度
    ! surface temperature
    !
    if ( present(xy_SurfTemp) ) then

      if ( flag_first_SurfTemp ) then
        ! 保存用変数の割付
        ! Allocate a variable for save
        !
        allocate( xy_SurfTempSave  (0:imax-1, 1:jmax) )
      end if
      if ( SurfTempSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !

        ! This will be deleted near future (yot, 2010/10/11)
!!$        if ( flag_first_SurfTemp ) then
!!$          call HistoryGet( &
!!$            & SurfTempFile, SurfTempName, &    ! (in)
!!$            & xy_SurfTempSave, &               ! (out)
!!$            & flag_mpi_split = flag_mpi_init ) ! (in) optional
!!$        end if
        call SetValuesFromTimeSeriesWrapper( SurfTempFile, SurfTempName, xy_SurfTempSave, 'SST' )
      else if ( SurfTempSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfTemp ) then
          call SetSurfData( xy_SurfTemp = xy_SurfTempSave )
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfTempSetting = %c is not appropriate.', c1 = trim(SurfTempSetting) )
      end if
      ! 地表面温度を SST で置き換え ( xy_SurfCond <=0 の場所のみ )
      ! Surface temperature is replaced with SST ( only xy_SurfCond <=0 )
      !
      if ( present(xy_SurfTemp) ) then

        if ( .not. present( xy_SurfCond ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfCond has to be present to set xy_SurfTemp.' )
        end if
        if ( .not. present( xy_SeaIceConc ) ) then
          call MessageNotify( 'E', module_name, ' xy_SeaIceConc has to be present to set xy_SurfTemp.' )
        end if

        if ( .not. FlagSlabOcean ) then

          do j = 1, jmax
            do i = 0, imax-1
              if ( ( xy_SurfCond(i,j)     <= 0               ) .and. ( xy_SurfTempSave(i,j) >  0.0_DP          ) .and. ( xy_SeaIceConc(i,j)   <  SeaIceThreshold ) ) then

                xy_SurfTemp(i,j) = xy_SurfTempSave(i,j)

              end if
            end do
          end do
        end if

      end if


      flag_first_SurfTemp = .false.
    end if


    ! 地形
    ! Topography
    !
    if ( present(xy_SurfHeight) ) then

      if ( SurfHeightSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfHeight ) then
          call HistoryGet( SurfHeightFile, SurfHeightName, xy_SurfHeight, flag_mpi_split = flag_mpi_init )   ! (in) optional
        end if
      else if ( SurfHeightSetting == 'generate_internally' ) then
        if ( flag_first_SurfHeight ) then
          xy_SurfHeight = 0.0_DP
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfHeightSetting = %c is not appropriate.', c1 = trim(SurfHeightSetting) )
      end if

      flag_first_SurfHeight = .false.
    end if


    ! NOTICE:
    ! The surface condition and sea ice concentration have to be set, before albedo 
    ! is set.
    !
    ! アルベド
    ! Albedo
    !
    if ( present(xy_SurfAlbedo) ) then

      if ( flag_first_SurfAlbedo ) then
        ! 保存用変数の割付
        ! Allocate a variable for save
        !
        allocate( xy_SurfAlbedoSave(0:imax-1, 1:jmax) )
      end if
      if ( AlbedoSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfAlbedo ) then
          call HistoryGet( AlbedoFile, AlbedoName, xy_SurfAlbedoSave, flag_mpi_split = flag_mpi_init ) ! (in) optional
        end if

      else if ( AlbedoSetting == 'Matthews' ) then
        ! アルベドを Matthews のデータをもとに設定
        ! Surface albedo is set based on Matthews' data
        !
        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
        if ( ( SurfTypeSetting /= 'same_as_SurfCond' ) .and. ( SurfTypeSetting /= 'file'             )       ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'same_as_SurfCond' or 'file', when AlbedoSetting = %c.", c1 = trim(AlbedoSetting) )
        end if
        call SetAlbedoMatthews( xy_SurfType, xy_SurfAlbedoSave )
      else if ( AlbedoSetting == 'LOContrast' ) then
        ! アルベドの設定, 陸面と海洋の差のみ考慮
        ! Set albedo, only considering land-ocean contrast
        !
        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
        if ( ( SurfTypeSetting /= 'same_as_SurfCond' ) .and. ( SurfTypeSetting /= 'file'             )       ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'same_as_SurfCond' or 'file', when AlbedoSetting = %c.", c1 = trim(AlbedoSetting) )
        end if
        call SetAlbedoLandOceanContrast( xy_SurfType, xy_SurfAlbedoSave )
      else if ( AlbedoSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        ! 
        if ( flag_first_SurfAlbedo ) then
          call SetSurfData( xy_SurfAlbedo = xy_SurfAlbedoSave )
        end if
      else
        call MessageNotify( 'E', module_name, ' AlbedoSetting = %c is not appropriate.', c1 = trim(AlbedoSetting) )
      end if
      ! アルベドの設定
      ! Setting of albedo
      !
      xy_SurfAlbedo = xy_SurfAlbedoSave


      if ( present( xy_SurfType ) ) then
        ! 雪と海氷によるアルベド変化
        ! modification of surface albedo on the snow covered ground and on the sea ice
        !

        if ( .not. present( xy_SurfMajCompIceB ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfMajCompIceB has to be present to set xy_SurfAlbedo.' )
        end if
        if ( .not. present( xy_SurfSnowB ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfSnowB has to be present to set xy_SurfAlbedo.' )
        end if
        if ( .not. present( xy_SeaIceConc ) ) then
          call MessageNotify( 'E', module_name, ' xy_SeaIceConc has to be present to set xy_SurfAlbedo.' )
        end if

        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
        if ( ( SurfTypeSetting /= 'same_as_SurfCond' ) .and. ( SurfTypeSetting /= 'file'             )       ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'same_as_SurfCond' or 'file'." )
        end if

        call ModAlbedoDueToSnowSeaIce( xy_SurfType, xy_SurfMajCompIceB, xy_SurfSnowB, xy_SeaIceConc, xy_SurfAlbedo )
      else
        call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to modify albedo due to snow and sea ice.' )
      end if

      flag_first_SurfAlbedo = .false.
    end if


    ! NOTICE:
    ! The surface condition has to be set, before humidity coefficient is set.
    !
    ! 惑星表面湿潤度
    ! Surface humidity coefficient
    !
    if ( present(xy_SurfHumidCoef) ) then

      if ( HumidCoefSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfHumidCoef ) then
          call HistoryGet( HumidcoefFile, HumidcoefName, xy_SurfHumidcoef, flag_mpi_split = flag_mpi_init ) ! (in) optional
        end if
      else if ( HumidCoefSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfHumidCoef ) then
          call SetSurfData( xy_SurfHumidCoef = xy_SurfHumidCoef )
        end if
      else
        call MessageNotify( 'E', module_name, ' HumidCoefSetting = %c is not appropriate.', c1 = trim(HumidCoefSetting) )
      end if

      if ( ( present( xy_SurfType   ) ) .and. ( present( xy_SoilMoistB ) ) .and. ( present( xy_SurfSnowB  ) ) ) then

        ! バケツモデルに関わる地表面湿潤度の設定
        ! Setting of surface humidity coefficient
        !
        call BucketSetFlagOceanFromMatthewsIndex( xy_SurfType, xy_BucketFlagOceanGrid )
        call BucketModHumidCoef( xy_BucketFlagOceanGrid, xy_SoilMoistB, xy_SurfSnowB, xy_SurfHumidCoef )
      else
        call MessageNotify( 'E', module_name, ' xy_SurfType, xy_SoilMoistB and Xy_SurfSnowB have to be present to modify humidity coefficient with bucket model.' )
      end if

      flag_first_SurfHumidCoef = .false.
    end if


    ! 粗度長
    ! Roughness length
    !
    if ( present(xy_SurfRoughLength) ) then

      if ( RoughLengthSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfRoughLength ) then
          call HistoryGet( RoughLengthFile, RoughLengthName, xy_SurfRoughLength, flag_mpi_split = flag_mpi_init )    ! (in) optional
        end if
      else if ( RoughLengthSetting == 'LOContrast' ) then
        ! 粗度長の設定, 陸面と海洋の差のみ考慮
        ! Set roughness length, only considering land-ocean contrast
        !
        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
        if ( ( SurfTypeSetting /= 'same_as_SurfCond' ) .and. ( SurfTypeSetting /= 'file'             )       ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'same_as_SurfCond' or 'file', when RoughLengthSetting = %c.", c1 = trim(RoughLengthSetting) )
        end if
        call SetRoughLenLandOceanContrast( xy_SurfType, xy_SurfRoughLength )
      else if ( RoughLengthSetting == 'Matthews' ) then
        ! 粗度長の設定, Matthews のデータに基づく
        ! Set roughness length based on Matthews dataset
        !
        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
        if ( ( SurfTypeSetting /= 'same_as_SurfCond' ) .and. ( SurfTypeSetting /= 'file'             )       ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'same_as_SurfCond' or 'file', when RoughLengthSetting = %c.", c1 = trim(RoughLengthSetting) )
        end if
        call SetRoughLenLandMatthews( xy_SurfType, xy_SurfRoughLength )
      else if ( RoughLengthSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfRoughLength ) then
          call SetSurfData( xy_SurfRoughLength = xy_SurfRoughLength )
        end if
      else
        call MessageNotify( 'E', module_name, ' RoughLengthSetting = %c is not appropriate.', c1 = trim(RoughLengthSetting) )
      end if

      flag_first_SurfRoughLength = .false.
    end if


    ! 地表熱容量
    ! Surface heat capacity
    !
    if ( present(xy_SurfHeatCapacity) ) then

      if ( HeatCapacitySetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfHeatCapacity ) then
          call HistoryGet( HeatCapacityFile, HeatCapacityName, xy_SurfHeatCapacity, flag_mpi_split = flag_mpi_init )      ! (in) optional
        end if
      else if ( HeatCapacitySetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfHeatCapacity ) then
          call SetSurfData( xy_SurfHeatCapacity = xy_SurfHeatCapacity )
        end if
      else
        call MessageNotify( 'E', module_name, ' HeatCapacitySetting = %c is not appropriate.', c1 = trim(HeatCapacitySetting) )
      end if

      flag_first_SurfHeatCapacity = .false.
    end if


    ! 地中熱フラックス
    ! Ground temperature flux
    !
    if ( present(xy_DeepSubSurfHeatFlux) ) then

      if ( TempFluxSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_DeepSubSurfHeatFlux ) then
          call HistoryGet( TempFluxFile, TempFluxName, xy_DeepSubSurfHeatFlux, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
      else if ( TempFluxSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_DeepSubSurfHeatFlux ) then
          call SetSurfData( xy_DeepSubSurfHeatFlux = xy_DeepSubSurfHeatFlux )
        end if
      else
        call MessageNotify( 'E', module_name, ' TempFluxSetting = %c is not appropriate.', c1 = trim(TempFluxSetting) )
      end if

      flag_first_DeepSubSurfHeatFlux = .false.
    end if


    ! 土壌熱容量 (J K-1 kg-1)
    ! Specific heat of soil (J K-1 kg-1)
    !
    if ( present(xy_SoilHeatCap) ) then

      if ( SoilHeatCapSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SoilHeatCap ) then
          call HistoryGet( SoilHeatCapFile, SoilHeatCapName, xy_SoilHeatCap, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
      else if ( SoilHeatCapSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SoilHeatCap ) then
          call SetSurfData( xy_SoilHeatCap = xy_SoilHeatCap )
        end if
      else
        call MessageNotify( 'E', module_name, ' SoilHeatCapSetting = %c is not appropriate.', c1 = trim(SoilHeatCapSetting) )
      end if

      flag_first_SoilHeatCap = .false.
    end if


    ! 土壌熱伝導率 (W m-1 K-1)
    ! Heat conduction coefficient of soil (W m-1 K-1)
    !
    if ( present(xy_SoilHeatDiffCoef) ) then

      if ( SoilHeatDiffCoefSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SoilHeatDiffCoef ) then
          call HistoryGet( SoilHeatDiffCoefFile, SoilHeatDiffCoefName, xy_SoilHeatDiffCoef, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
      else if ( SoilHeatDiffCoefSetting == 'file_thermal_inertia' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SoilHeatDiffCoef ) then
          call HistoryGet( SoilHeatDiffCoefFile, SoilHeatDiffCoefName, xy_SoilHeatDiffCoef, flag_mpi_split = flag_mpi_init )  ! (in) optional

          if ( present( xy_SoilHeatCap ) ) then
            xy_SoilHeatDiffCoef = xy_SoilHeatDiffCoef**2 / xy_SoilHeatCap
          else
            call MessageNotify( 'E', module_name, ' xy_SoilHeatCap has to be present to calculate heat diffusion coefficient of soil from thermal inertia.' )
          end if
        end if
      else if ( SoilHeatDiffCoefSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SoilHeatDiffCoef ) then
          call SetSurfData( xy_SoilHeatDiffCoef = xy_SoilHeatDiffCoef )
        end if
      else
        call MessageNotify( 'E', module_name, ' SoilHeatDiffCoefSetting = %c is not appropriate.', c1 = trim(TempFluxSetting) )
      end if

      flag_first_SoilHeatDiffCoef = .false.
    end if



    ! 計算時間計測一時停止
    ! Pause measurement of computation time
    !
    call TimesetClockStop( module_name )


  end subroutine SetSurfaceProperties
Subroutine :
ArgFlagSlabOcean :logical, intent(in )
: スラブオーシャン オン/オフ. flag for use of slab ocean on/off

surface_properties モジュールの初期化を行います. NAMELIST#surface_properties_nml の読み込みはこの手続きで行われます.

"surface_properties" module is initialized. "NAMELIST#surface_properties_nml" is loaded in this procedure.

This procedure input/output NAMELIST#surface_properties_nml .

[Source]

  subroutine SurfacePropertiesInit( ArgFlagSlabOcean )
    !
    ! surface_properties モジュールの初期化を行います. 
    ! NAMELIST#surface_properties_nml の読み込みはこの手続きで行われます. 
    !
    ! "surface_properties" module is initialized. 
    ! "NAMELIST#surface_properties_nml" is loaded in this procedure. 
    !

    ! モジュール引用 ; USE statements
    !

    ! 種別型パラメタ
    ! Kind type parameter
    !
    use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime  ! $ \Delta t $ [s]

    ! Matthews のデータに基づく惑星表面アルベド設定
    ! set surface albedo based on data by Matthews
    !
    use albedo_Matthews, only : AlbedoMatthewsInit

    ! バケツモデル
    ! Bucket model
    !
    use Bucket_Model, only : BucketModelInit

    ! 雪と海氷によるアルベド変化
    ! modification of surface albedo on the snow covered ground and on the sea ice
    !
    use modify_albedo_snowseaice, only : ModAlbedoSnowSeaIceInit

    ! アルベド, 粗度長の設定, 陸面と海洋の差のみ考慮
    ! Set albedo and roughness length, only considering land-ocean contrast
    !
    use surface_properties_landoceancontrast, only : SurfacePropertiesLandOceanContrastInit

    ! Matthews のデータに基づく地面粗度の設定
    ! set roughness length on land surface based on data by Matthews
    !
    use roughlen_Matthews, only : RoughLenMatthewsInit

    ! 宣言文 ; Declaration statements
    !
    logical, intent(in ) :: ArgFlagSlabOcean
                              ! スラブオーシャン オン/オフ.
                              ! flag for use of slab ocean on/off

    ! 作業変数
    ! Work variables
    !
    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /surface_properties_nml/ SurfTempSetting, SurfTempFile, SurfTempName, SeaIceSetting, SeaIceFile, SeaIceName, AlbedoSetting, AlbedoFile, AlbedoName, HumidCoefSetting, HumidCoefFile, HumidCoefName, RoughLengthSetting, RoughLengthFile, RoughLengthName, HeatCapacitySetting, HeatCapacityFile, HeatCapacityName, TempFluxSetting, TempFluxFile, TempFluxName, SurfCondSetting, SurfCondFile, SurfCondName, SurfTypeSetting, SurfTypeFile, SurfTypeName, SurfHeightSetting, SurfHeightFile, SurfHeightName, SoilHeatCapSetting, SoilHeatCapFile, SoilHeatCapName, SoilHeatDiffCoefSetting, SoilHeatDiffCoefFile, SoilHeatDiffCoefName

          ! デフォルト値については初期化手続 "surface_properties#SurfacePropertiesInit" 
          ! のソースコードを参照のこと. 
          !
          ! Refer to source codes in the initialization procedure
          ! "surface_properties#SurfacePropertiesInit" for the default values. 
          !

!!$      & OutputFile, &
!!$      & IntValue, IntUnit


    ! 実行文 ; Executable statement
    !

    if ( surface_properties_inited ) return


    ! Set flag for slab ocean
    FlagSlabOcean = ArgFlagSlabOcean


    ! デフォルト値の設定
    ! Default values settings
    !
    SurfTempSetting         = 'generate_internally'
    SurfTempFile            = ''
    SurfTempName            = ''
    SeaIceSetting           = 'generate_internally'
    SeaIceFile              = ''
    SeaIceName              = ''
    AlbedoSetting           = 'generate_internally'
    AlbedoFile              = ''
    AlbedoName              = ''
    HumidCoefSetting        = 'generate_internally'
    HumidCoefFile           = ''
    HumidCoefName           = ''
    RoughLengthSetting      = 'generate_internally'
    RoughLengthFile         = ''
    RoughLengthName         = ''
    HeatCapacitySetting     = 'generate_internally'
    HeatCapacityFile        = ''
    HeatCapacityName        = ''
    TempFluxSetting         = 'generate_internally'
    TempFluxFile            = ''
    TempFluxName            = ''
    SurfCondSetting         = 'generate_internally'
    SurfCondFile            = ''
    SurfCondName            = ''
    SurfTypeSetting         = 'same_as_SurfCond'
    SurfTypeFile            = ''
    SurfTypeName            = ''
    SurfHeightSetting       = 'generate_internally'
    SurfHeightFile          = ''
    SurfHeightName          = ''
    SoilHeatCapSetting      = 'generate_internally'
    SoilHeatCapFile         = ''
    SoilHeatCapName         = ''
    SoilHeatDiffCoefSetting = 'generate_internally'
    SoilHeatDiffCoefFile    = ''
    SoilHeatDiffCoefName    = ''

!!$    OutputFile = 'sst.nc'
!!$    IntValue   = 1.0_DP
!!$    IntUnit    = 'day'

    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = surface_properties_nml, iostat = iostat_nml )
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
      if ( iostat_nml == 0 ) write( STDOUT, nml = surface_properties_nml )
    end if

!!$    ! 出力時間間隔の設定
!!$    ! Configure time interval of output 
!!$    !
!!$    call DCDiffTimeCreate( PrevOutputTime, & ! (out)
!!$      & sec = 0.0_DP )                       ! (in)
!!$    call DCDiffTimeCreate( IntTime, & ! (out)
!!$      & IntValue, IntUnit )           ! (in)


    ! A Value of "SurfTempSetting" is checked.
    !
    if ( ( SurfTempSetting == 'file' ) .and. ( FlagSlabOcean ) ) then
      call MessageNotify( 'E', module_name, "If FlagSlabOcean is .true., SurfTempSetting must not be 'file'." )
    end if


    ! Initialization of modules used in this module
    !

    ! Matthews のデータに基づく惑星表面アルベド設定
    ! set surface albedo based on data by Matthews
    !
    call AlbedoMatthewsInit

    ! バケツモデル
    ! Bucket model
    !
    call BucketModelInit

    ! 雪と海氷によるアルベド変化
    ! modification of surface albedo on the snow covered ground and on the sea ice
    !
    call ModAlbedoSnowSeaIceInit

    ! アルベド, 粗度長の設定, 陸面と海洋の差のみ考慮
    ! Set albedo and roughness length, only considering land-ocean contrast
    !
    call SurfacePropertiesLandOceanContrastInit

    ! Matthews のデータに基づく地面粗度の設定
    ! set roughness length on land surface based on data by Matthews
    !
    call RoughLenMatthewsInit


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, 'Input:: ' )
    call MessageNotify( 'M', module_name, '  SurfTempSetting         = %c', c1 = trim(SurfTempSetting) )
    call MessageNotify( 'M', module_name, '  SurfTempFile            = %c', c1 = trim(SurfTempFile) )
    call MessageNotify( 'M', module_name, '  SurfTempName            = %c', c1 = trim(SurfTempName        ) )
    call MessageNotify( 'M', module_name, '  SeaIceSetting           = %c', c1 = trim(SeaIceSetting) )
    call MessageNotify( 'M', module_name, '  SeaIceFile              = %c', c1 = trim(SeaIceFile) )
    call MessageNotify( 'M', module_name, '  SeaIceName              = %c', c1 = trim(SeaIceName        ) )
    call MessageNotify( 'M', module_name, '  AlbedoSetting           = %c', c1 = trim(AlbedoSetting      ) )
    call MessageNotify( 'M', module_name, '  AlbedoFile              = %c', c1 = trim(AlbedoFile      ) )
    call MessageNotify( 'M', module_name, '  AlbedoName              = %c', c1 = trim(AlbedoName      ) )
    call MessageNotify( 'M', module_name, '  HumidCoefSetting        = %c', c1 = trim(HumidCoefSetting ) )
    call MessageNotify( 'M', module_name, '  HumidCoefFile           = %c', c1 = trim(HumidCoefFile  ) )
    call MessageNotify( 'M', module_name, '  HumidCoefName           = %c', c1 = trim(HumidCoefName  ) )
    call MessageNotify( 'M', module_name, '  RoughLengthSetting      = %c', c1 = trim(RoughLengthSetting ) )
    call MessageNotify( 'M', module_name, '  RoughLengthFile         = %c', c1 = trim(RoughLengthFile ) )
    call MessageNotify( 'M', module_name, '  RoughLengthName         = %c', c1 = trim(RoughLengthName ) )
    call MessageNotify( 'M', module_name, '  HeatCapacitySetting     = %c', c1 = trim(HeatCapacitySetting) )
    call MessageNotify( 'M', module_name, '  HeatCapacityFile        = %c', c1 = trim(HeatCapacityFile) )
    call MessageNotify( 'M', module_name, '  HeatCapacityName        = %c', c1 = trim(HeatCapacityName) )
    call MessageNotify( 'M', module_name, '  TempFluxSetting         = %c', c1 = trim(TempFluxSetting  ) )
    call MessageNotify( 'M', module_name, '  TempFluxFile            = %c', c1 = trim(TempFluxFile  ) )
    call MessageNotify( 'M', module_name, '  TempFluxName            = %c', c1 = trim(TempFluxName  ) )
    call MessageNotify( 'M', module_name, '  SurfCondSetting         = %c', c1 = trim(SurfCondSetting   ) )
    call MessageNotify( 'M', module_name, '  SurfCondFile            = %c', c1 = trim(SurfCondFile   ) )
    call MessageNotify( 'M', module_name, '  SurfCondName            = %c', c1 = trim(SurfCondName   ) )
    call MessageNotify( 'M', module_name, '  SurfTypeSetting         = %c', c1 = trim(SurfTypeSetting   ) )
    call MessageNotify( 'M', module_name, '  SurfTypeFile            = %c', c1 = trim(SurfTypeFile   ) )
    call MessageNotify( 'M', module_name, '  SurfTypeName            = %c', c1 = trim(SurfTypeName   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightSetting       = %c', c1 = trim(SurfHeightSetting   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightFile          = %c', c1 = trim(SurfHeightFile   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightName          = %c', c1 = trim(SurfHeightName   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatCapSetting      = %c', c1 = trim(SoilHeatCapSetting   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatCapFile         = %c', c1 = trim(SoilHeatCapFile   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatCapName         = %c', c1 = trim(SoilHeatCapName   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatDiffCoefSetting = %c', c1 = trim(SoilHeatDiffCoefSetting   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatDiffCoefFile    = %c', c1 = trim(SoilHeatDiffCoefFile   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatDiffCoefName    = %c', c1 = trim(SoilHeatDiffCoefName   ) )


!!$    call MessageNotify( 'M', module_name, 'Output:: ' )
!!$    call MessageNotify( 'M', module_name, '  OutputFile = %c', c1 = trim(OutputFile) )
!!$    call MessageNotify( 'M', module_name, '  IntTime    = %f [%c]', d = (/ IntValue /), c1 = trim(IntUnit) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )

    surface_properties_inited = .true.

  end subroutine SurfacePropertiesInit

Private Instance methods

AlbedoFile
Variable :
AlbedoFile :character(STRING), save
: 地表アルベドのファイル名. File name of surface albedo
AlbedoName
Variable :
AlbedoName :character(TOKEN) , save
: 地表アルベドの変数名. Variable name of surface albedo
AlbedoSetting
Variable :
AlbedoSetting :character(STRING), save
: 地表アルベドの設定方法 Settingof surface albedo
FlagSlabOcean
Variable :
FlagSlabOcean :logical , save
: スラブオーシャン オン/オフ. flag for use of slab ocean on/off
HeatCapacityFile
Variable :
HeatCapacityFile :character(STRING), save
: 地表熱容量のファイル名. File name of surface heat capacity
HeatCapacityName
Variable :
HeatCapacityName :character(TOKEN) , save
: 地表熱容量の変数名. Variable name of surface heat capacity
HeatCapacitySetting
Variable :
HeatCapacitySetting :character(STRING), save
: 地表熱容量の設定方法 Setting of surface heat capacity
HumidCoefFile
Variable :
HumidCoefFile :character(STRING), save
: 地表湿潤度のファイル名. File name of surface humidity coefficient
HumidCoefName
Variable :
HumidCoefName :character(TOKEN) , save
: 地表湿潤度の変数名. Variable name of surface humidity coefficient
HumidCoefSetting
Variable :
HumidCoefSetting :character(STRING), save
: 地表湿潤度の設定方法 Setting of surface humidity coefficient
RoughLengthFile
Variable :
RoughLengthFile :character(STRING), save
: 地表粗度長のファイル名. File name of surface rough length
RoughLengthName
Variable :
RoughLengthName :character(TOKEN) , save
: 地表粗度長の変数名. Variable name of surface rough length
RoughLengthSetting
Variable :
RoughLengthSetting :character(STRING), save
: 地表粗度長の設定方法 Setting of surface rough length
SeaIceFile
Variable :
SeaIceFile :character(STRING), save
: 海氷面密度のファイル名. File name of sea ice concentration
SeaIceName
Variable :
SeaIceName :character(TOKEN) , save
: 海氷面密度の変数名. Variable name of sea ice concentration
SeaIceSetting
Variable :
SeaIceSetting :character(STRING), save
: 海氷面密度の設定方法 Setting of sea ice concentration
SoilHeatCapFile
Variable :
SoilHeatCapFile :character(STRING), save
: 土壌熱容量のファイル名. File name of heat conduction coefficient of soil
SoilHeatCapName
Variable :
SoilHeatCapName :character(TOKEN) , save
: 土壌熱容量の変数名. Variable name of heat conduction coefficient of soil
SoilHeatCapSetting
Variable :
SoilHeatCapSetting :character(STRING), save
: 土壌熱容量の設定方法 Setting of heat conduction coefficient of soil
SoilHeatDiffCoefFile
Variable :
SoilHeatDiffCoefFile :character(STRING), save
: 土壌熱伝導率のファイル名. File name of heat conduction coefficient of soil
SoilHeatDiffCoefName
Variable :
SoilHeatDiffCoefName :character(TOKEN) , save
: 土壌熱伝導率の変数名. Variable name of heat conduction coefficient of soil
SoilHeatDiffCoefSetting
Variable :
SoilHeatDiffCoefSetting :character(STRING), save
: 土壌熱伝導率の設定方法 Setting of heat conduction coefficient of soil
SurfCondFile
Variable :
SurfCondFile :character(STRING), save
: 惑星表面状態のファイル名. File name of surface condition
SurfCondName
Variable :
SurfCondName :character(TOKEN) , save
: 惑星表面状態の変数名. Variable name of surface condition
SurfCondSetting
Variable :
SurfCondSetting :character(STRING), save
: 惑星表面状態の設定方法 Setting of surface condition
SurfHeightFile
Variable :
SurfHeightFile :character(STRING), save
: 地表面高度のファイル名. File name of surface height
SurfHeightName
Variable :
SurfHeightName :character(TOKEN) , save
: 地表面高度の変数名. Variable name of surface height
SurfHeightSetting
Variable :
SurfHeightSetting :character(STRING), save
: 地表面高度の設定方法 Setting of surface height
SurfTempFile
Variable :
SurfTempFile :character(STRING), save
: 地表面温度のファイル名. File name of surface temperature
SurfTempName
Variable :
SurfTempName :character(TOKEN) , save
: 地表面温度の変数名. Variable name of surface temperature
SurfTempSetting
Variable :
SurfTempSetting :character(STRING), save
: 地表面温度の設定方法 Setting of surface temperature
SurfTypeFile
Variable :
SurfTypeFile :character(STRING), save
: 惑星表面タイプ (土地利用) のファイル名. File name of surface type (land use)
SurfTypeName
Variable :
SurfTypeName :character(TOKEN) , save
: 惑星表面タイプ (土地利用) の変数名. Variable name of surface type (land use)
SurfTypeSetting
Variable :
SurfTypeSetting :character(STRING), save
: 惑星表面タイプ (土地利用) の設定方法 Setting of surface type (land use)
TempFluxFile
Variable :
TempFluxFile :character(STRING), save
: 地中熱フラックスのファイル名. File name of ground temperature flux
TempFluxName
Variable :
TempFluxName :character(TOKEN) , save
: 地中熱フラックスの変数名. Variable name of ground temperature flux
TempFluxSetting
Variable :
TempFluxSetting :character(STRING), save
: 地中熱フラックスの設定方法 Setting of ground temperature flux
module_name
Constant :
module_name = ‘surface_properties :character(*), parameter
: モジュールの名称. Module name
surface_properties_inited
Variable :
surface_properties_inited = .false. :logical, save
: 初期設定フラグ. Initialization flag
version
Constant :
version = ’$Name: dcpam5-20120229 $’ // ’$Id: surface_properties.f90,v 1.13 2012-01-20 00:16:41 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version